HADOOP-7564. Remove test-patch SVN externals

git-svn-id: https://svn.apache.org/repos/asf/hadoop/common/trunk@1187570 13f79535-47bb-0310-9956-ffa450edef68
This commit is contained in:
Thomas White 2011-10-21 21:58:27 +00:00
parent 4186121c08
commit 49ab924cb5
2 changed files with 0 additions and 773 deletions

View File

@ -1,72 +0,0 @@
#!/usr/bin/env bash
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
set -e
PATCH_FILE=$1
if [ -z "$PATCH_FILE" ]; then
echo usage: $0 patch-file
exit 1
fi
PATCH=${PATCH:-patch} # allow overriding patch binary
# Cleanup handler for temporary files
TOCLEAN=""
cleanup() {
rm $TOCLEAN
exit $1
}
trap "cleanup 1" HUP INT QUIT TERM
# Allow passing "-" for stdin patches
if [ "$PATCH_FILE" == "-" ]; then
PATCH_FILE=/tmp/tmp.in.$$
cat /dev/fd/0 > $PATCH_FILE
TOCLEAN="$TOCLEAN $PATCH_FILE"
fi
# Come up with a list of changed files into $TMP
TMP=/tmp/tmp.paths.$$
TOCLEAN="$TOCLEAN $TMP"
grep '^+++\|^---' $PATCH_FILE | cut -c '5-' | grep -v /dev/null | sort | uniq > $TMP
# Assume p0 to start
PLEVEL=0
# if all of the lines start with a/ or b/, then this is a git patch that
# was generated without --no-prefix
if ! grep -qv '^a/\|^b/' $TMP ; then
echo Looks like this is a git patch. Stripping a/ and b/ prefixes
echo and incrementing PLEVEL
PLEVEL=$[$PLEVEL + 1]
sed -i -e 's,^[ab]/,,' $TMP
fi
# if all of the lines start with common/, hdfs/, or mapreduce/, this is
# relative to the hadoop root instead of the subproject root, so we need
# to chop off another layer
PREFIX_DIRS=$(cut -d '/' -f 1 $TMP | sort | uniq)
if [[ "$PREFIX_DIRS" =~ ^(hdfs|common|mapreduce)$ ]]; then
echo Looks like this is relative to project root. Increasing PLEVEL
PLEVEL=$[$PLEVEL + 1]
elif ! echo "$PREFIX_DIRS" | grep -vxq 'common\|hdfs\|mapreduce' ; then
echo Looks like this is a cross-subproject patch. Not supported!
exit 1
fi
echo Going to apply patch with: $PATCH -p$PLEVEL
$PATCH -p$PLEVEL -E < $PATCH_FILE
cleanup 0

View File

@ -1,701 +0,0 @@
#!/usr/bin/env bash
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#set -x
ulimit -n 1024
### Setup some variables.
### SVN_REVISION and BUILD_URL are set by Hudson if it is run by patch process
### Read variables from properties file
bindir=$(dirname $0)
. $bindir/../test-patch.properties
###############################################################################
parseArgs() {
case "$1" in
HUDSON)
### Set HUDSON to true to indicate that this script is being run by Hudson
HUDSON=true
if [[ $# != 16 ]] ; then
echo "ERROR: usage $0 HUDSON <PATCH_DIR> <SUPPORT_DIR> <PS_CMD> <WGET_CMD> <JIRACLI> <SVN_CMD> <GREP_CMD> <PATCH_CMD> <FINDBUGS_HOME> <FORREST_HOME> <ECLIPSE_HOME> <WORKSPACE_BASEDIR> <JIRA_PASSWD> <CURL_CMD> <DEFECT> "
cleanupAndExit 0
fi
PATCH_DIR=$2
SUPPORT_DIR=$3
PS=$4
WGET=$5
JIRACLI=$6
SVN=$7
GREP=$8
PATCH=$9
FINDBUGS_HOME=${10}
FORREST_HOME=${11}
ECLIPSE_HOME=${12}
BASEDIR=${13}
JIRA_PASSWD=${14}
CURL=${15}
defect=${16}
### Retrieve the defect number
if [ -z "$defect" ] ; then
echo "Could not determine the patch to test. Exiting."
cleanupAndExit 0
fi
if [ ! -e "$PATCH_DIR" ] ; then
mkdir -p $PATCH_DIR
fi
ECLIPSE_PROPERTY="-Declipse.home=$ECLIPSE_HOME"
;;
DEVELOPER)
### Set HUDSON to false to indicate that this script is being run by a developer
HUDSON=false
if [[ $# != 9 ]] ; then
echo "ERROR: usage $0 DEVELOPER <PATCH_FILE> <SCRATCH_DIR> <SVN_CMD> <GREP_CMD> <PATCH_CMD> <FINDBUGS_HOME> <FORREST_HOME> <WORKSPACE_BASEDIR>"
cleanupAndExit 0
fi
### PATCH_FILE contains the location of the patchfile
PATCH_FILE=$2
if [[ ! -e "$PATCH_FILE" ]] ; then
echo "Unable to locate the patch file $PATCH_FILE"
cleanupAndExit 0
fi
PATCH_DIR=$3
### Check if $PATCH_DIR exists. If it does not exist, create a new directory
if [[ ! -e "$PATCH_DIR" ]] ; then
mkdir "$PATCH_DIR"
if [[ $? == 0 ]] ; then
echo "$PATCH_DIR has been created"
else
echo "Unable to create $PATCH_DIR"
cleanupAndExit 0
fi
fi
SVN=$4
GREP=$5
PATCH=$6
FINDBUGS_HOME=$7
FORREST_HOME=$8
BASEDIR=$9
### Obtain the patch filename to append it to the version number
defect=`basename $PATCH_FILE`
;;
*)
echo "ERROR: usage $0 HUDSON [args] | DEVELOPER [args]"
cleanupAndExit 0
;;
esac
}
###############################################################################
checkout () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Testing patch for ${defect}."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### When run by a developer, if the workspace contains modifications, do not continue
status=`$SVN stat --ignore-externals | sed -e '/^X[ ]*/D'`
if [[ $HUDSON == "false" ]] ; then
if [[ "$status" != "" ]] ; then
echo "ERROR: can't run in a workspace that contains the following modifications"
echo "$status"
cleanupAndExit 1
fi
else
cd $BASEDIR
$SVN revert -R .
rm -rf `$SVN status --no-ignore`
$SVN update
fi
return $?
}
###############################################################################
setup () {
### Download latest patch file (ignoring .htm and .html) when run from patch process
if [[ $HUDSON == "true" ]] ; then
$WGET -q -O $PATCH_DIR/jira http://issues.apache.org/jira/browse/$defect
if [[ `$GREP -c 'Patch Available' $PATCH_DIR/jira` == 0 ]] ; then
echo "$defect is not \"Patch Available\". Exiting."
cleanupAndExit 0
fi
relativePatchURL=`$GREP -o '"/jira/secure/attachment/[0-9]*/[^"]*' $PATCH_DIR/jira | $GREP -v -e 'htm[l]*$' | sort | tail -1 | $GREP -o '/jira/secure/attachment/[0-9]*/[^"]*'`
patchURL="http://issues.apache.org${relativePatchURL}"
patchNum=`echo $patchURL | $GREP -o '[0-9]*/' | $GREP -o '[0-9]*'`
echo "$defect patch is being downloaded at `date` from"
echo "$patchURL"
$WGET -q -O $PATCH_DIR/patch $patchURL
VERSION=${SVN_REVISION}_${defect}_PATCH-${patchNum}
JIRA_COMMENT="Here are the results of testing the latest attachment
$patchURL
against trunk revision ${SVN_REVISION}."
### Copy in any supporting files needed by this process
cp -r $SUPPORT_DIR/lib/* ./lib
#PENDING: cp -f $SUPPORT_DIR/etc/checkstyle* ./src/test
### Copy the patch file to $PATCH_DIR
else
VERSION=PATCH-${defect}
cp $PATCH_FILE $PATCH_DIR/patch
if [[ $? == 0 ]] ; then
echo "Patch file $PATCH_FILE copied to $PATCH_DIR"
else
echo "Could not copy $PATCH_FILE to $PATCH_DIR"
cleanupAndExit 0
fi
fi
### exit if warnings are NOT defined in the properties file
if [ -z "$OK_FINDBUGS_WARNINGS" ] || [[ -z "$OK_JAVADOC_WARNINGS" ]] || [[ -z $OK_RELEASEAUDIT_WARNINGS ]]; then
echo "Please define the following properties in test-patch.properties file"
echo "OK_FINDBUGS_WARNINGS"
echo "OK_RELEASEAUDIT_WARNINGS"
echo "OK_JAVADOC_WARNINGS"
cleanupAndExit 1
fi
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Pre-build trunk to verify trunk stability and javac warnings"
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$ANT_HOME/bin/ant -Djavac.args="-Xlint -Xmaxwarns 1000" $ECLIPSE_PROPERTY -Dforrest.home=${FORREST_HOME} -D${PROJECT_NAME}PatchProcess= clean tar > $PATCH_DIR/trunkJavacWarnings.txt 2>&1"
$ANT_HOME/bin/ant -Djavac.args="-Xlint -Xmaxwarns 1000" $ECLIPSE_PROPERTY -Dforrest.home=${FORREST_HOME} -D${PROJECT_NAME}PatchProcess= clean tar > $PATCH_DIR/trunkJavacWarnings.txt 2>&1
if [[ $? != 0 ]] ; then
echo "Trunk compilation is broken?"
cleanupAndExit 1
fi
}
###############################################################################
### Check for @author tags in the patch
checkAuthor () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Checking there are no @author tags in the patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
authorTags=`$GREP -c -i '@author' $PATCH_DIR/patch`
echo "There appear to be $authorTags @author tags in the patch."
if [[ $authorTags != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 @author. The patch appears to contain $authorTags @author tags which the Hadoop community has agreed to not allow in code contributions."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 @author. The patch does not contain any @author tags."
return 0
}
###############################################################################
### Check for tests in the patch
checkTests () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Checking there are new or changed tests in the patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
testReferences=`$GREP -c -i '/test' $PATCH_DIR/patch`
echo "There appear to be $testReferences test files referenced in the patch."
if [[ $testReferences == 0 ]] ; then
if [[ $HUDSON == "true" ]] ; then
patchIsDoc=`$GREP -c -i 'title="documentation' $PATCH_DIR/jira`
if [[ $patchIsDoc != 0 ]] ; then
echo "The patch appears to be a documentation patch that doesn't require tests."
JIRA_COMMENT="$JIRA_COMMENT
+0 tests included. The patch appears to be a documentation patch that doesn't require tests."
return 0
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
-1 tests included. The patch doesn't appear to include any new or modified tests.
Please justify why no new tests are needed for this patch.
Also please list what manual steps were performed to verify this patch."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 tests included. The patch appears to include $testReferences new or modified tests."
return 0
}
cleanUpXml () {
cd $BASEDIR/conf
for file in `ls *.xml.template`
do
rm -f `basename $file .template`
done
cd $BASEDIR
}
###############################################################################
### Attempt to apply the patch
applyPatch () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Applying patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
export PATCH
$bindir/smart-apply-patch.sh $PATCH_DIR/patch
if [[ $? != 0 ]] ; then
echo "PATCH APPLICATION FAILED"
JIRA_COMMENT="$JIRA_COMMENT
-1 patch. The patch command could not apply the patch."
return 1
fi
return 0
}
###############################################################################
### Check there are no javadoc warnings
checkJavadocWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched javadoc warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= clean javadoc | tee $PATCH_DIR/patchJavadocWarnings.txt"
$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= clean javadoc | tee $PATCH_DIR/patchJavadocWarnings.txt
javadocWarnings=`$GREP -o '\[javadoc\] [0-9]* warning' $PATCH_DIR/patchJavadocWarnings.txt | awk '{total += $2} END {print total}'`
echo ""
echo ""
echo "There appear to be $javadocWarnings javadoc warnings generated by the patched build."
### if current warnings greater than OK_JAVADOC_WARNINGS
if [[ $javadocWarnings > $OK_JAVADOC_WARNINGS ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 javadoc. The javadoc tool appears to have generated `expr $(($javadocWarnings-$OK_JAVADOC_WARNINGS))` warning messages."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 javadoc. The javadoc tool did not generate any warning messages."
return 0
}
###############################################################################
### Check there are no changes in the number of Javac warnings
checkJavacWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched javac warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -Djavac.args="-Xlint -Xmaxwarns 1000" $ECLIPSE_PROPERTY -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= clean tar > $PATCH_DIR/patchJavacWarnings.txt 2>&1"
$ANT_HOME/bin/ant -Dversion="${VERSION}" -Djavac.args="-Xlint -Xmaxwarns 1000" $ECLIPSE_PROPERTY -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= clean tar > $PATCH_DIR/patchJavacWarnings.txt 2>&1
if [[ $? != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 javac. The patch appears to cause tar ant target to fail."
return 1
fi
### Compare trunk and patch javac warning numbers
if [[ -f $PATCH_DIR/patchJavacWarnings.txt ]] ; then
trunkJavacWarnings=`$GREP -o '\[javac\] [0-9]* warning' $PATCH_DIR/trunkJavacWarnings.txt | awk '{total += $2} END {print total}'`
patchJavacWarnings=`$GREP -o '\[javac\] [0-9]* warning' $PATCH_DIR/patchJavacWarnings.txt | awk '{total += $2} END {print total}'`
echo "There appear to be $trunkJavacWarnings javac compiler warnings before the patch and $patchJavacWarnings javac compiler warnings after applying the patch."
if [[ $patchJavacWarnings != "" && $trunkJavacWarnings != "" ]] ; then
if [[ $patchJavacWarnings -gt $trunkJavacWarnings ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 javac. The applied patch generated $patchJavacWarnings javac compiler warnings (more than the trunk's current $trunkJavacWarnings warnings)."
return 1
fi
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 javac. The applied patch does not increase the total number of javac compiler warnings."
return 0
}
###############################################################################
### Check there are no changes in the number of release audit (RAT) warnings
checkReleaseAuditWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched release audit warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= releaseaudit > $PATCH_DIR/patchReleaseAuditWarnings.txt 2>&1"
$ANT_HOME/bin/ant -Dversion="${VERSION}" -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= releaseaudit > $PATCH_DIR/patchReleaseAuditWarnings.txt 2>&1
### Compare trunk and patch release audit warning numbers
if [[ -f $PATCH_DIR/patchReleaseAuditWarnings.txt ]] ; then
patchReleaseAuditWarnings=`$GREP -c '\!?????' $PATCH_DIR/patchReleaseAuditWarnings.txt`
echo ""
echo ""
echo "There appear to be $OK_RELEASEAUDIT_WARNINGS release audit warnings before the patch and $patchReleaseAuditWarnings release audit warnings after applying the patch."
if [[ $patchReleaseAuditWarnings != "" && $OK_RELEASEAUDIT_WARNINGS != "" ]] ; then
if [[ $patchReleaseAuditWarnings -gt $OK_RELEASEAUDIT_WARNINGS ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 release audit. The applied patch generated $patchReleaseAuditWarnings release audit warnings (more than the trunk's current $OK_RELEASEAUDIT_WARNINGS warnings)."
$GREP '\!?????' $PATCH_DIR/patchReleaseAuditWarnings.txt > $PATCH_DIR/patchReleaseAuditProblems.txt
echo "Lines that start with ????? in the release audit report indicate files that do not have an Apache license header." >> $PATCH_DIR/patchReleaseAuditProblems.txt
JIRA_COMMENT_FOOTER="Release audit warnings: $BUILD_URL/artifact/trunk/patchprocess/patchReleaseAuditProblems.txt
$JIRA_COMMENT_FOOTER"
return 1
fi
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 release audit. The applied patch does not increase the total number of release audit warnings."
return 0
}
###############################################################################
### Check there are no changes in the number of Checkstyle warnings
checkStyle () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched checkstyle warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "THIS IS NOT IMPLEMENTED YET"
echo ""
echo ""
echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= checkstyle"
$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= checkstyle
JIRA_COMMENT_FOOTER="Checkstyle results: $BUILD_URL/artifact/trunk/build/test/checkstyle-errors.html
$JIRA_COMMENT_FOOTER"
### TODO: calculate actual patchStyleErrors
# patchStyleErrors=0
# if [[ $patchStyleErrors != 0 ]] ; then
# JIRA_COMMENT="$JIRA_COMMENT
#
# -1 checkstyle. The patch generated $patchStyleErrors code style errors."
# return 1
# fi
# JIRA_COMMENT="$JIRA_COMMENT
#
# +1 checkstyle. The patch generated 0 code style errors."
return 0
}
###############################################################################
### Check there are no changes in the number of Findbugs warnings
checkFindbugsWarnings () {
findbugs_version=`${FINDBUGS_HOME}/bin/findbugs -version`
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched Findbugs warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -Dfindbugs.home=$FINDBUGS_HOME -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= findbugs"
$ANT_HOME/bin/ant -Dversion="${VERSION}" -Dfindbugs.home=${FINDBUGS_HOME} -Dforrest.home=${FORREST_HOME} -DHadoopPatchProcess= findbugs
if [ $? != 0 ] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 findbugs. The patch appears to cause Findbugs (version ${findbugs_version}) to fail."
return 1
fi
JIRA_COMMENT_FOOTER="Findbugs warnings: $BUILD_URL/artifact/trunk/build/test/findbugs/newPatchFindbugsWarnings.html
$JIRA_COMMENT_FOOTER"
cp $BASEDIR/build/test/findbugs/*.xml $PATCH_DIR/patchFindbugsWarnings.xml
$FINDBUGS_HOME/bin/setBugDatabaseInfo -timestamp "01/01/2000" \
$PATCH_DIR/patchFindbugsWarnings.xml \
$PATCH_DIR/patchFindbugsWarnings.xml
findbugsWarnings=`$FINDBUGS_HOME/bin/filterBugs -first "01/01/2000" $PATCH_DIR/patchFindbugsWarnings.xml \
$BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.xml | /usr/bin/awk '{print $1}'`
$FINDBUGS_HOME/bin/convertXmlToText -html \
$BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.xml \
$BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.html
cp $BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.html $PATCH_DIR/newPatchFindbugsWarnings.html
cp $BASEDIR/build/test/findbugs/newPatchFindbugsWarnings.xml $PATCH_DIR/newPatchFindbugsWarnings.xml
### if current warnings greater than OK_FINDBUGS_WARNINGS
if [[ $findbugsWarnings > $OK_FINDBUGS_WARNINGS ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 findbugs. The patch appears to introduce `expr $(($findbugsWarnings-$OK_FINDBUGS_WARNINGS))` new Findbugs (version ${findbugs_version}) warnings."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 findbugs. The patch does not introduce any new Findbugs (version ${findbugs_version}) warnings."
return 0
}
###############################################################################
### Run the test-core target
runCoreTests () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Running core tests."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### Kill any rogue build processes from the last attempt
$PS auxwww | $GREP HadoopPatchProcess | /usr/bin/nawk '{print $2}' | /usr/bin/xargs -t -I {} /bin/kill -9 {} > /dev/null
PreTestTarget=""
if [[ $defect == MAPREDUCE-* ]] ; then
PreTestTarget="create-c++-configure"
fi
echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME $PreTestTarget test-core"
$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME $PreTestTarget test-core
if [[ $? != 0 ]] ; then
### Find and format names of failed tests
failed_tests=`grep -l -E "<failure|<error" $WORKSPACE/trunk/build/test/*.xml | sed -e "s|.*build/test/TEST-| |g" | sed -e "s|\.xml||g"`
JIRA_COMMENT="$JIRA_COMMENT
-1 core tests. The patch failed these core unit tests:
$failed_tests"
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 core tests. The patch passed core unit tests."
return 0
}
###############################################################################
### Run the test-contrib target
runContribTests () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Running contrib tests."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
if [[ `$GREP -c 'test-contrib' build.xml` == 0 ]] ; then
echo "No contrib tests in this project."
return 0
fi
### Kill any rogue build processes from the last attempt
$PS auxwww | $GREP HadoopPatchProcess | /usr/bin/nawk '{print $2}' | /usr/bin/xargs -t -I {} /bin/kill -9 {} > /dev/null
echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" $ECLIPSE_PROPERTY -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no test-contrib"
$ANT_HOME/bin/ant -Dversion="${VERSION}" $ECLIPSE_PROPERTY -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no test-contrib
if [[ $? != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 contrib tests. The patch failed contrib unit tests."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 contrib tests. The patch passed contrib unit tests."
return 0
}
###############################################################################
### Run the inject-system-faults target
checkInjectSystemFaults () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Checking the integrity of system test framework code."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### Kill any rogue build processes from the last attempt
$PS auxwww | $GREP HadoopPatchProcess | /usr/bin/nawk '{print $2}' | /usr/bin/xargs -t -I {} /bin/kill -9 {} > /dev/null
echo "$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME inject-system-faults"
$ANT_HOME/bin/ant -Dversion="${VERSION}" -DHadoopPatchProcess= -Dtest.junit.output.format=xml -Dtest.output=no -Dcompile.c++=yes -Dforrest.home=$FORREST_HOME inject-system-faults
if [[ $? != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 system test framework. The patch failed system test framework compile."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 system test framework. The patch passed system test framework compile."
return 0
}
###############################################################################
### Submit a comment to the defect's Jira
submitJiraComment () {
local result=$1
### Do not output the value of JIRA_COMMENT_FOOTER when run by a developer
if [[ $HUDSON == "false" ]] ; then
JIRA_COMMENT_FOOTER=""
fi
if [[ $result == 0 ]] ; then
comment="+1 overall. $JIRA_COMMENT
$JIRA_COMMENT_FOOTER"
else
comment="-1 overall. $JIRA_COMMENT
$JIRA_COMMENT_FOOTER"
fi
### Output the test result to the console
echo "
$comment"
if [[ $HUDSON == "true" ]] ; then
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Adding comment to Jira."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### Update Jira with a comment
export USER=hudson
$JIRACLI -s https://issues.apache.org/jira -a addcomment -u hadoopqa -p $JIRA_PASSWD --comment "$comment" --issue $defect
$JIRACLI -s https://issues.apache.org/jira -a logout -u hadoopqa -p $JIRA_PASSWD
fi
}
###############################################################################
### Cleanup files
cleanupAndExit () {
local result=$1
if [[ $HUDSON == "true" ]] ; then
if [ -e "$PATCH_DIR" ] ; then
mv $PATCH_DIR $BASEDIR
fi
fi
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Finished build."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
exit $result
}
###############################################################################
###############################################################################
###############################################################################
JIRA_COMMENT=""
JIRA_COMMENT_FOOTER="Console output: $BUILD_URL/console
This message is automatically generated."
### Check if arguments to the script have been specified properly or not
parseArgs $@
cd $BASEDIR
checkout
RESULT=$?
if [[ $HUDSON == "true" ]] ; then
if [[ $RESULT != 0 ]] ; then
exit 100
fi
fi
setup
checkAuthor
RESULT=$?
if [[ $HUDSON == "true" ]] ; then
cleanUpXml
fi
checkTests
(( RESULT = RESULT + $? ))
applyPatch
if [[ $? != 0 ]] ; then
submitJiraComment 1
cleanupAndExit 1
fi
checkJavadocWarnings
(( RESULT = RESULT + $? ))
checkJavacWarnings
(( RESULT = RESULT + $? ))
### Checkstyle not implemented yet
#checkStyle
#(( RESULT = RESULT + $? ))
checkFindbugsWarnings
(( RESULT = RESULT + $? ))
checkReleaseAuditWarnings
(( RESULT = RESULT + $? ))
### Do not call these when run by a developer
if [[ $HUDSON == "true" ]] ; then
runCoreTests
(( RESULT = RESULT + $? ))
runContribTests
(( RESULT = RESULT + $? ))
fi
checkInjectSystemFaults
(( RESULT = RESULT + $? ))
JIRA_COMMENT_FOOTER="Test results: $BUILD_URL/testReport/
$JIRA_COMMENT_FOOTER"
submitJiraComment $RESULT
cleanupAndExit $RESULT