This moves Hadoop to Apache commons-collections4.
Apache commons-collections has been removed and is completely banned from the source code.
Contributed by Nihal Jain
- following rest apis did not have access control
- - /ws/v1/history/containerlogs/{containerid}/{filename}
- - /ws/v1/history/containers/{containerid}/logs
Change-Id: I434f6138966ab22583d356509e40b70d328d9e7c
Improve task commit resilience everywhere
and add an option to reduce delete IO requests on
job cleanup (relevant for ABFS and HDFS).
Task Commit Resilience
----------------------
Task manifest saving is re-attempted on failure; the number of
attempts made is configurable with the option:
mapreduce.manifest.committer.manifest.save.attempts
* The default is 5.
* The minimum is 1; asking for less is ignored.
* A retry policy adds 500ms of sleep per attempt.
* Move from classic rename() to commitFile() to rename the file,
after calling getFileStatus() to get its length and possibly etag.
This becomes a rename() on gcs/hdfs anyway, but on abfs it does reach
the ResilientCommitByRename callbacks in abfs, which report on
the outcome to the caller...which is then logged at WARN.
* New statistic task_stage_save_summary_file to distinguish from
other saving operations (job success/report file).
This is only saved to the manifest on task commit retries, and
provides statistics on all previous unsuccessful attempts to save
the manifests
+ test changes to match the codepath changes, including improvements
in fault injection.
Directory size for deletion
---------------------------
New option
mapreduce.manifest.committer.cleanup.parallel.delete.base.first
This attempts an initial attempt at deleting the base dir, only falling
back to parallel deletes if there's a timeout.
This option is disabled by default; Consider enabling it for abfs to
reduce IO load. Consult the documentation for more details.
Success file printing
---------------------
The command to print a JSON _SUCCESS file from this committer and
any S3A committer is now something which can be invoked from
the mapred command:
mapred successfile <path to file>
Contributed by Steve Loughran
This addresses two CVEs triggered by malformed archives
Important: Denial of Service CVE-2024-25710
Moderate: Denial of Service CVE-2024-26308
Contributed by PJ Fanning
Co-authored-by: Wei-Chiu Chuang <weichiu@apache.org>
Includes HADOOP-18354. Upgrade reload4j to 1.22.2 due to XXE vulnerability (#4607).
Log4j 1.2.17 has been replaced by reloadj 1.22.2
SLF4J is at 1.7.36
This adds borad support for Amazon S3 Express One Zone to the S3A connector,
particularly resilience of other parts of the codebase to LIST operations returning
paths under which only in-progress uploads are taking place.
hadoop-common and hadoop-mapreduce treewalking routines all cope with this;
distcp is left alone.
There are still some outstanding followup issues, and we expect more to surface
with extended use.
Contains HADOOP-18955. AWS SDK v2: add path capability probe "fs.s3a.capability.aws.v2
* lets us probe for AWS SDK version
* bucket-info reports it
Contains HADOOP-18961 S3A: add s3guard command "bucket"
hadoop s3guard bucket -create -region us-west-2 -zone usw2-az2 \
s3a://stevel--usw2-az2--x-s3/
* requires -zone if bucket is zonal
* rejects it if not
* rejects zonal bucket suffixes if endpoint is not aws (safety feature)
* imperfect, but a functional starting point.
New path capability "fs.s3a.capability.zonal.storage"
* Used in tests to determine whether pending uploads manifest paths
* cli tests can probe for this
* bucket-info reports it
* some tests disable/change assertions as appropriate
----
Shell commands fail on S3Express buckets if pending uploads.
New path capability in hadoop-common
"fs.capability.directory.listing.inconsistent"
1. S3AFS returns true on a S3 Express bucket
2. FileUtil.maybeIgnoreMissingDirectory(fs, path, fnfe)
decides whether to swallow the exception or not.
3. This is used in: Shell, FileInputFormat, LocatedFileStatusFetcher
Fixes with tests
* fs -ls -R
* fs -du
* fs -df
* fs -find
* S3AFS.getContentSummary() (maybe...should discuss)
* mapred LocatedFileStatusFetcher
* Globber, HADOOP-15478 already fixed that when dealing with
S3 inconsistencies
* FileInputFormat
S3Express CreateSession request is permitted outside audit spans.
S3 Bulk Delete calls request the store to return the list of deleted objects
if RequestFactoryImpl is set to trace.
log4j.logger.org.apache.hadoop.fs.s3a.impl.RequestFactoryImpl=TRACE
Test Changes
* ITestS3AMiscOperations removes all tests which require unencrypted
buckets. AWS S3 defaults to SSE-S3 everywhere.
* ITestBucketTool to test new tool without actually creating new
buckets.
* S3ATestUtils add methods to skip test suites/cases if store is/is not
S3Express
* Cutting down on "is this a S3Express bucket" logic to trailing --x-s3 string
and not worrying about AZ naming logic. commented out relevant tests.
* ITestTreewalkProblems validated against standard and S3Express stores
Outstanding
* Distcp: tests show it fails. Proposed: release notes.
---
x-amz-checksum header not found when signing S3Express messages
This modifies the custom signer in ITestCustomSigner to be a subclass
of AwsS3V4Signer with a goal of preventing signing problems with
S3 Express stores.
----
RemoteFileChanged renaming multipart file
Maps 412 status code to RemoteFileChangedException
Modifies huge file tests
-Adds a check on etag match for stat vs list
-ITestS3AHugeFilesByteBufferBlocks renames parent dirs, rather than
files, to replicate distcp better.
----
S3Express custom Signing cannot handle bulk delete
Copy custom signer into production JAR, so enable downstream testing
Extend ITestCustomSigner to cover more filesystem operations
- PUT
- POST
- COPY
- LIST
- Bulk delete through delete() and rename()
- list + abort multipart uploads
Suite is parameterized on bulk delete enabled/disabled.
To use the new signer for a full test run:
<property>
<name>fs.s3a.custom.signers</name>
<value>CustomSdkSigner:org.apache.hadoop.fs.s3a.auth.CustomSdkSigner</value>
</property>
<property>
<name>fs.s3a.s3.signing-algorithm</name>
<value>CustomSdkSigner</value>
</property>
Protobuf 2.5 JAR is no longer needed at runtime.
The option common.protobuf.scope defines whether the protobuf 2.5.0
dependency is marked as provided or not.
* New package org.apache.hadoop.ipc.internal for internal only protobuf classes
...with a ShadedProtobufHelper in there which has shaded protobuf refs
only, so guaranteed not to need protobuf-2.5 on the CP
* All uses of org.apache.hadoop.ipc.ProtobufHelper have
been replaced by uses of org.apache.hadoop.ipc.internal.ShadedProtobufHelper
* The scope of protobuf-2.5 is set by the option common.protobuf2.scope
In this patch is it is still "compile"
* There is explicit reference to it in modules where it may be needed.
* The maven scope of the dependency can be set with the common.protobuf2.scope
option. It can be set to "provided" in a build:
-Dcommon.protobuf2.scope=provided
* Add new ipc(callable) method to catch and convert shaded protobuf
exceptions raised during invocation of the supplied lambda expression
* This is adopted in the code where the migration is not traumatically
over-complex. RouterAdminProtocolTranslatorPB is left alone for this
reason.
Contributed by Steve Loughran
In container-log4j.properties, log4j.appender.{APPENDER}.MaxFileSize is set to ${yarn.app.container.log.filesize}, but yarn.app.container.log.filesize is 0 in default. So log is missing. This log is always rolling and only show the latest log.
By default, the mapreduce manifest committer is used for jobs working with abfs and gcs.
Hadoop mapreduce will pick this up automatically; for Spark it is a bit complicated: read the docs
to see the steps required.
* Add jdiff xml files from 3.3.6 release.
* Declare 3.3.6 as the latest stable release.
* Copy release notes.
(cherry picked from commit 7db9895000)
(cherry picked from commit cc121e2124aa01458dc296a060edc5e21a295268)
This modifies the manifest committer so that the list of files
to rename is passed between stages as a file of
writeable entries on the local filesystem.
The map of directories to create is still passed in memory;
this map is built across all tasks, so even if many tasks
created files, if they all write into the same set of directories
the memory needed is O(directories) with the
task count not a factor.
The _SUCCESS file reports on heap size through gauges.
This should give a warning if there are problems.
Contributed by Steve Loughran
This:
1. Adds optLong, optDouble, mustLong and mustDouble
methods to the FSBuilder interface to let callers explicitly
passin long and double arguments.
2. The opt() and must() builder calls which take float/double values
now only set long values instead, so as to avoid problems
related to overloaded methods resulting in a ".0" being appended
to a long value.
3. All of the relevant opt/must calls in the hadoop codebase move to
the new methods
4. And the s3a code is resilient to parse errors in is numeric options
-it will downgrade to the default.
This is nominally incompatible, but the floating-point builder methods
were never used: nothing currently expects floating point numbers.
For anyone who wants to safely set numeric builder options across all compatible
releases, convert the number to a string and then use the opt(String, String)
and must(String, String) methods.
Contributed by Steve Loughran
The HDFS lease APIs have been replicated as interfaces in hadoop-common so other filesystems can
also implement them. Applications which use the leasing APIs should migrate to the new
interface where possible.
Contributed by Stephen Wu
