Contributed by Steve Loughran.
Fixes a condition which can cause job commit to fail if a task was
aborted < 60s before the job commit commenced: the task abort
will shut down the thread pool with a hard exit after 60s; the
job commit POST requests would be scheduled through the same pool,
so be interrupted and fail. At present the access is synchronized,
but presumably the executor shutdown code is calling wait() and releasing
locks.
Task abort is triggered from the AM when task attempts succeed but
there are still active speculative task attempts running. Thus it
only surfaces when speculation is enabled and the final tasks are
speculating, which, given they are the stragglers, is not unheard of.
Note: this problem has never been seen in production; it has surfaced
in the hadoop-aws tests on a heavily overloaded desktop
Contributed by Steve Loughran.
S3A delegation token providers will be asked for any additional
token issuers, an array can be returned,
each one will be asked for tokens when DelegationTokenIssuer collects
all the tokens for a filesystem.
Contributed by Mukund Thakur and Steve Loughran.
This patch ensures that writes to S3A fail when more than 10,000 blocks are
written. That upper bound still exists. To write massive files, make sure
that the value of fs.s3a.multipart.size is set to a size which is large
enough to upload the files in fewer than 10,000 blocks.
Change-Id: Icec604e2a357ffd38d7ae7bc3f887ff55f2d721a
Contributed by Steve Loughran.
The S3Guard absence warning of HADOOP-16484 has been changed
so that by default the S3A connector only logs at debug
when the connection to the S3 Store does not have S3Guard
enabled.
The option to control this log level is now
fs.s3a.s3guard.disabled.warn.level
and can be one of: silent, inform, warn, fail.
On a failure, an ExitException is raised with exit code 49.
For details on this safety feature, consult the s3guard documentation.
HADOOP-16986. S3A to not need wildfly JAR on its classpath.
Contributed by Steve Loughran
This is a successor to HADOOP-16346, which enabled the S3A connector
to load the native openssl SSL libraries for better HTTPS performance.
That patch required wildfly.jar to be on the classpath. This
update:
* Makes wildfly.jar optional except in the special case that
"fs.s3a.ssl.channel.mode" is set to "openssl"
* Retains the declaration of wildfly.jar as a compile-time
dependency in the hadoop-aws POM. This means that unless
explicitly excluded, applications importing that published
maven artifact will, transitively, add the specified
wildfly JAR into their classpath for compilation/testing/
distribution.
This is done for packaging and to offer that optional
speedup. It is not mandatory: applications importing
the hadoop-aws POM can exclude it if they choose.
Contributed by Mukund Thakur.
If you set the log org.apache.hadoop.fs.s3a.impl.NetworkBinding
to DEBUG, then when the S3A bucket probe is made -the DNS address
of the S3 endpoint is calculated and printed.
This is useful to see if a large set of processes are all using
the same IP address from the pool of load balancers to which AWS
directs clients when an AWS S3 endpoint is resolved.
This can have implications for performance: if all clients
access the same load balancer performance may be suboptimal.
Note: if bucket probes are disabled, fs.s3a.bucket.probe = 0,
the DNS logging does not take place.
Change-Id: I21b3ac429dc0b543f03e357fdeb94c2d2a328dd8
add unit test, new ITest and then fix the issue: different schema, bucket == skip
factored out the underlying logic for unit testing; also moved
maybeAddTrailingSlash to S3AUtils (while retaining/forwarnding existing method
in S3AFS).
tested: london, sole failure is
testListingDelete[auth=true](org.apache.hadoop.fs.s3a.ITestS3GuardOutOfBandOperations)
filed HADOOP-16853
Change-Id: I4b8d0024469551eda0ec70b4968cba4abed405ed
Contributed by Ben Roling.
ETag values are unpredictable with some S3 encryption algorithms.
Skip ITestS3AMiscOperations tests which make assertions about etags
when default encryption on a bucket is enabled.
When testing with an AWS an account which lacks the privilege
for a call to getBucketEncryption(), we don't skip the tests.
In the event of failure, developers get to expand the
permissions of the account or relax default encryption settings.
Contributed by Steve Loughran
* move qualify logic to S3AFileSystem.makeQualified()
* make S3AFileSystem.qualify() a private redirect to that
* ITestS3GuardFsShell turned off
Contributed by Steve Loughran.
Not all stores do complete validation here; in particular the S3A
Connector does not: checking up the entire directory tree to see if a path matches
is a file significantly slows things down.
This check does take place in S3A mkdirs(), which walks backwards up the list of
parent paths until it finds a directory (success) or a file (failure).
In practice production applications invariably create destination directories
before writing 1+ file into them -restricting check purely to the mkdirs()
call deliver significant speed up while implicitly including the checks.
Change-Id: I2c9df748e92b5655232e7d888d896f1868806eb0
AreContributed by Mukund Thakur.
This addresses an issue which surfaced with KMS encryption: the wrong
KMS key could be picked up in the S3 COPY operation, so
renamed files, while encrypted, would end up with the
bucket default key.
As well as adding tests in the new suite
ITestS3AEncryptionWithDefaultS3Settings,
AbstractSTestS3AHugeFiles has a new test method to
verify that the encryption settings also work
for large files copied via multipart operations.
Contributed by Sergei Poganshev.
Catches Exception instead of IOException in closeStream()
and so handle exceptions such as SdkClientException by
aborting the wrapped stream. This will increase resilience
to failures, as any which occuring during stream closure
will be caught. Furthermore, because the
underlying HTTP connection is aborted, rather than closed,
it will not be recycled to cause problems on subsequent
operations.
This adds a new option fs.s3a.bucket.probe, range (0-2) to
control which probe for a bucket existence to perform on startup.
0: no checks
1: v1 check (as has been performend until now)
2: v2 bucket check, which also incudes a permission check. Default.
When set to 0, bucket existence checks won't be done
during initialization thus making it faster.
When the bucket is not available in S3,
or if fs.s3a.endpoint points to the wrong instance of a private S3 store
consecutive calls like listing, read, write etc. will fail with
an UnknownStoreException.
Contributed by:
* Mukund Thakur (main patch and tests)
* Rajesh Balamohan (v0 list and performance tests)
* lqjacklee (HADOOP-15990/v2 list)
* Steve Loughran (UnknownStoreException support)
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/Constants.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/S3AFileSystem.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/S3ARetryPolicy.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/S3AUtils.java
new file: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/UnknownStoreException.java
new file: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/impl/ErrorTranslation.java
modified: hadoop-tools/hadoop-aws/src/site/markdown/tools/hadoop-aws/index.md
modified: hadoop-tools/hadoop-aws/src/site/markdown/tools/hadoop-aws/performance.md
modified: hadoop-tools/hadoop-aws/src/site/markdown/tools/hadoop-aws/troubleshooting_s3a.md
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/AbstractS3AMockTest.java
new file: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/ITestS3ABucketExistence.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/MockS3ClientFactory.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/TestS3AExceptionTranslation.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/AbstractS3GuardToolTestBase.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestS3GuardToolDynamoDB.java
modified: hadoop-tools/hadoop-aws/src/test/resources/core-site.xml
Change-Id: Ic174f803e655af172d81c1274ed92b51bdceb384
Contributed by Steve Loughran.
During S3A rename() and delete() calls, the list of objects delete is
built up into batches of a thousand and then POSTed in a single large
DeleteObjects request.
But as the IO capacity allowed on an S3 partition may only be 3500 writes
per second *and* each entry in that POST counts as a single write, then
one of those posts alone can trigger throttling on an already loaded
S3 directory tree. Which can trigger backoff and retry, with the same
thousand entry post, and so recreate the exact same problem.
Fixes
* Page size for delete object requests is set in
fs.s3a.bulk.delete.page.size; the default is 250.
* The property fs.s3a.experimental.aws.s3.throttling (default=true)
can be set to false to disable throttle retry logic in the AWS
client SDK -it is all handled in the S3A client. This
gives more visibility in to when operations are being throttled
* Bulk delete throttling events are logged to the log
org.apache.hadoop.fs.s3a.throttled log at INFO; if this appears
often then choose a smaller page size.
* The metric "store_io_throttled" adds the entire count of delete
requests when a single DeleteObjects request is throttled.
* A new quantile, "store_io_throttle_rate" can track throttling
load over time.
* DynamoDB metastore throttle resilience issues have also been
identified and fixed. Note: the fs.s3a.experimental.aws.s3.throttling
flag does not apply to DDB IO precisely because there may still be
lurking issues there and it safest to rely on the DynamoDB client
SDK.
Change-Id: I00f85cdd94fc008864d060533f6bd4870263fd84
Contributed by Steve Loughran.
This fixes two problems with S3Guard authoritative mode and
the auth directory flags which are stored in DynamoDB.
1. mkdirs was creating dir markers without the auth bit,
forcing needless scans on newly created directories and
files subsequently added; it was only with the first listStatus call
on that directory that the dir would be marked as authoritative -even
though it would be complete already.
2. listStatus(path) would reset the authoritative status bit of all
child directories even if they were already marked as authoritative.
Issue #2 is possibly the most expensive, as any treewalk using listStatus
(e.g globfiles) would clear the auth bit for all child directories before
listing them. And this would happen every single time...
essentially you weren't getting authoritative directory listings.
For the curious, that the major bug was actually found during testing
-we'd all missed it during reviews.
A lesson there: the better the tests the fewer the bugs.
Maybe also: something obvious and significant can get by code reviews.
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/S3AFileSystem.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/BulkOperationState.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/DynamoDBMetadataStore.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/LocalMetadataStore.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/MetadataStore.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/NullMetadataStore.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/S3Guard.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/ITestS3GuardWriteBack.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/auth/ITestRestrictedReadAccess.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/impl/TestPartialDeleteFailures.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestDynamoDBMetadataStore.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestDynamoDBMetadataStoreAuthoritativeMode.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestDynamoDBMetadataStoreScale.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestS3GuardFsck.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/MetadataStoreTestBase.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/TestS3Guard.java
Change-Id: Ic3ffda13f2af2430afedd50fd657b595c83e90a7
Contributed by Mustafa Iman.
This adds a new configuration option fs.s3a.connection.request.timeout
to declare the time out on HTTP requests to the AWS service;
0 means no timeout.
Measured in seconds; the usual time suffixes are all supported
Important: this is the maximum duration of any AWS service call,
including upload and copy operations. If non-zero, it must be larger
than the time to upload multi-megabyte blocks to S3 from the client,
and to rename many-GB files. Use with care.
Change-Id: I407745341068b702bf8f401fb96450a9f987c51c
* Enhanced builder + FS spec
* s3a FS to use this to skip HEAD on open
* and to use version/etag when opening the file
works with S3AFileStatus FS and S3ALocatedFileStatus
Introduces `openssl` as an option for `fs.s3a.ssl.channel.mode`.
The new option is documented and marked as experimental.
For details on how to use this, consult the peformance document
in the s3a documentation.
This patch is the successor to HADOOP-16050 "S3A SSL connections
should use OpenSSL" -which was reverted because of
incompatibilities between the wildfly OpenSSL client and the AWS
HTTPS servers (HADOOP-16347). With the Wildfly release moved up
to 1.0.7.Final (HADOOP-16405) everything should now work.
Related issues:
* HADOOP-15669. ABFS: Improve HTTPS Performance
* HADOOP-16050: S3A SSL connections should use OpenSSL
* HADOOP-16371: Option to disable GCM for SSL connections when running on Java 8
* HADOOP-16405: Upgrade Wildfly Openssl version to 1.0.7.Final
Contributed by Sahil Takiar
Change-Id: I80a4bc5051519f186b7383b2c1cea140be42444e
Contains:
HADOOP-16474. S3Guard ProgressiveRenameTracker to mark destination
dirirectory as authoritative on success.
HADOOP-16684. S3guard bucket info to list a bit more about
authoritative paths.
HADOOP-16722. S3GuardTool to support FilterFileSystem.
This patch improves the marking of newly created/import directory
trees in S3Guard DynamoDB tables as authoritative.
Specific changes:
* Renamed directories are marked as authoritative if the entire
operation succeeded (HADOOP-16474).
* When updating parent table entries as part of any table write,
there's no overwriting of their authoritative flag.
s3guard import changes:
* new -verbose flag to print out what is going on.
* The "s3guard import" command lets you declare that a directory tree
is to be marked as authoritative
hadoop s3guard import -authoritative -verbose s3a://bucket/path
When importing a listing and a file is found, the import tool queries
the metastore and only updates the entry if the file is different from
before, where different == new timestamp, etag, or length. S3Guard can get
timestamp differences due to clock skew in PUT operations.
As the recursive list performed by the import command doesn't retrieve the
versionID, the existing entry may in fact be more complete.
When updating an existing due to clock skew the existing version ID
is propagated to the new entry (note: the etags must match; this is needed
to deal with inconsistent listings).
There is a new s3guard command to audit a s3guard bucket/path's
authoritative state:
hadoop s3guard authoritative -check-config s3a://bucket/path
This is primarily for testing/auditing.
The s3guard bucket-info command also provides some more details on the
authoritative state of a store (HADOOP-16684).
Change-Id: I58001341c04f6f3597fcb4fcb1581ccefeb77d91
Contributed by Steve Loughran.
This is part of the ongoing refactoring of the S3A codebase, with the
delegation token support (HADOOP-14556) no longer given a direct reference
to the owning S3AFileSystem. Instead it gets a StoreContext and a new
interface, DelegationOperations, to access those operations offered by S3AFS
which are specifically needed by the DT bindings.
The sole operation needed is listAWSPolicyRules(), which is used to allow
S3A FS and the S3Guard metastore to return the AWS policy rules needed to
access their specific services/buckets/tables, allowing the AssumedRole
delegation token to be locked down.
As further restructuring takes place, that interface's implementation
can be moved to wherever the new home for those operations ends up.
Although it changes the API of an extension point, that feature (S3
Delegation Tokens) has not shipped; backwards compatibility is not a
problem except for anyone who has implemented DT support against trunk.
To those developers: sorry.
Change-Id: I770f58b49ff7634a34875ba37b7d51c94d7c21da
Contributed by Steve Loughran.
This downgrade the checks for leftover __magic entries from fail to warn now the parallel
test runs make speculation more likely.
Change-Id: Ia4df2e90f82a06dbae69f3fdaadcbb0e0d713b38
Contributed by Steve Loughran.
This FileSystem instantiation so if an IOException or RuntimeException is
raised in the invocation of FileSystem.initialize() then a best-effort
attempt is made to close the FS instance; exceptions raised that there
are swallowed.
The S3AFileSystem is also modified to do its own cleanup if an
IOException is raised during its initialize() process, it being the
FS we know has the "potential" to leak threads, especially in
extension points (e.g AWS Authenticators) which spawn threads.
Change-Id: Ib84073a606c9d53bf53cbfca4629876a03894f04
