This has triggered an OOM in a process which was churning through s3a fs
instances; the increased memory footprint of IOStatistics amplified what
must have been a long-standing issue with FS instances being created
and not closed()
* Makes sure instrumentation is closed when the FS is closed.
* Uses a weak reference from metrics to instrumentation, so even
if the FS wasn't closed (see HADOOP-18478), this back reference
would not cause the S3AInstrumentation reference to be retained.
* If S3AFileSystem is configured to log at TRACE it will log the
calling stack of initialize(), so help identify where the
instance is being created. This should help track down
the cause of instance leakage.
Contributed by Steve Loughran.
This fixes a race condition with the TemporaryAWSCredentialProvider
one which has existed for a long time but which only surfaced
(usually in Spark) when the bucket existence probe was disabled
by setting fs.s3a.bucket.probe to 0 -a performance speedup
which was made the default in HADOOP-17454.
Contributed by Jimmy Wong.
The option "fs.s3a.proxy.ssl.enabled" controls
whether the s3a connects to a proxy over HTTP (default) or HTTPS.
Set to "true" to use HTTPS.
Contributed by Mehakmeet Singh
The AWS SDKV2 upgrade log no longer warns about instantiation
of the v1 SDK credential providers which are commonly used in
s3a configurations:
* com.amazonaws.auth.EnvironmentVariableCredentialsProvider
* com.amazonaws.auth.EC2ContainerCredentialsProviderWrapper
* com.amazonaws.auth.InstanceProfileCredentialsProvider
When the hadoop-aws module moves to the v2 SDK, references to these
credential providers will be rewritten to their v2 equivalents.
Follow-on to HADOOP-18382. "Upgrade AWS SDK to V2 - Prerequisites"
Contributed by Ahmar Suhail
Make S3APrefetchingInputStream.seek() completely lazy. Calls to seek() will not affect the current buffer nor interfere with prefetching, until read() is called.
This change allows various usage patterns to benefit from prefetching, e.g. when calling readFully(position, buffer) in a loop for contiguous positions the intermediate internal calls to seek() will be noops and prefetching will have the same performance as in a sequential read.
Contributed by Alessandro Passaro.
part of HADOOP-18103.
Also introducing a config fs.s3a.vectored.active.ranged.reads
to configure the maximum number of number of range reads a
single input stream can have active (downloading, or queued)
to the central FileSystem instance's pool of queued operations.
This stops a single stream overloading the shared thread pool.
Contributed by: Mukund Thakur
part of HADOOP-18103.
While merging the ranges in CheckSumFs, they are rounded up based on the
value of checksum bytes size which leads to some ranges crossing the EOF
thus they need to be fixed else it will cause EOFException during actual reads.
Contributed By: Mukund Thakur
Follow-up to HADOOP-12020 Support configuration of different S3 storage classes;
S3 storage class is now set when buffering to heap/bytebuffers, and when
creating directory markers
Contributed by Monthon Klongklaew
HADOOP-16202 "Enhance openFile()" added asynchronous draining of the
remaining bytes of an S3 HTTP input stream for those operations
(unbuffer, seek) where it could avoid blocking the active
thread.
This patch fixes the asynchronous stream draining to work and so
return the stream back to the http pool. Without this, whenever
unbuffer() or seek() was called on a stream and an asynchronous
drain triggered, the connection was not returned; eventually
the pool would be empty and subsequent S3 requests would
fail with the message "Timeout waiting for connection from pool"
The root cause was that even though the fields passed in to drain() were
converted to references through the methods, in the lambda expression
passed in to submit, they were direct references
operation = client.submit(
() -> drain(uri, streamStatistics,
false, reason, remaining,
object, wrappedStream)); /* here */
Those fields were only read during the async execution, at which
point they would have been set to null (or even a subsequent read).
A new SDKStreamDrainer class peforms the draining; this is a Callable
and can be submitted directly to the executor pool.
The class is used in both the classic and prefetching s3a input streams.
Also, calling unbuffer() switches the S3AInputStream from adaptive
to random IO mode; that is, it is considered a cue that future
IO will not be sequential, whole-file reads.
Contributed by Steve Loughran.
This patch prepares the hadoop-aws module for a future
migration to using the v2 AWS SDK (HADOOP-18073)
That upgrade will be incompatible; this patch prepares
for it:
-marks some credential providers and other
classes and methods as @deprecated.
-updates site documentation
-reduces the visibility of the s3 client;
other than for testing, it is kept private to
the S3AFileSystem class.
-logs some warnings when deprecated APIs are used.
The warning messages are printed only once
per JVM's life. To disable them, set the
log level of org.apache.hadoop.fs.s3a.SDKV2Upgrade
to ERROR
Contributed by Ahmar Suhail
This is the the preview release of the HADOOP-18028 S3A performance input stream.
It is still stabilizing, but ready to test.
Contains
HADOOP-18028. High performance S3A input stream (#4109)
Contributed by Bhalchandra Pandit.
HADOOP-18180. Replace use of twitter util-core with java futures (#4115)
Contributed by PJ Fanning.
HADOOP-18177. Document prefetching architecture. (#4205)
Contributed by Ahmar Suhail
HADOOP-18175. fix test failures with prefetching s3a input stream (#4212)
Contributed by Monthon Klongklaew
HADOOP-18231. S3A prefetching: fix failing tests & drain stream async. (#4386)
* adds in new test for prefetching input stream
* creates streamStats before opening stream
* updates numBlocks calculation method
* fixes ITestS3AOpenCost.testOpenFileLongerLength
* drains stream async
* fixes failing unit test
Contributed by Ahmar Suhail
HADOOP-18254. Disable S3A prefetching by default. (#4469)
Contributed by Ahmar Suhail
HADOOP-18190. Collect IOStatistics during S3A prefetching (#4458)
This adds iOStatisticsConnection to the S3PrefetchingInputStream class, with
new statistic names in StreamStatistics.
This stream is not (yet) IOStatisticsContext aware.
Contributed by Ahmar Suhail
HADOOP-18379 rebase feature/HADOOP-18028-s3a-prefetch to trunk
HADOOP-18187. Convert s3a prefetching to use JavaDoc for fields and enums.
HADOOP-18318. Update class names to be clear they belong to S3A prefetching
Contributed by Steve Loughran
JobID.toString() and TaskID.toString() to only be called
when the IDs are not null.
This doesn't surface in MapReduce, but Spark SQL can trigger
in job abort, where it may invok abortJob() with an
incomplete TaskContext.
This patch MUST be applied to branches containing
HADOOP-17833. "Improve Magic Committer Performance."
Contributed by Steve Loughran.
jobId.toString() to only be called when the ID isn't null.
this doesn't surface in MR, but spark seems to manage it
Change-Id: I06692ef30a4af510c660d7222292932a8d4b5147
The name of the option to enable/disable thread level statistics is
"fs.iostatistics.thread.level.enabled";
There is also an enabled() probe in IOStatisticsContext which can
be used to see if the thread level statistics is active.
Contributed by Viraj Jasani
Fixes CVE-2018-7489 in shaded jackson.
+Add more commands in testing.md
to the CLI tests needed when qualifying
a release
Contributed by Steve Loughran
This adds a thread-level collector of IOStatistics, IOStatisticsContext,
which can be:
* Retrieved for a thread and cached for access from other
threads.
* reset() to record new statistics.
* Queried for live statistics through the
IOStatisticsSource.getIOStatistics() method.
* Queries for a statistics aggregator for use in instrumented
classes.
* Asked to create a serializable copy in snapshot()
The goal is to make it possible for applications with multiple
threads performing different work items simultaneously
to be able to collect statistics on the individual threads,
and so generate aggregate reports on the total work performed
for a specific job, query or similar unit of work.
Some changes in IOStatistics-gathering classes are needed for
this feature
* Caching the active context's aggregator in the object's
constructor
* Updating it in close()
Slightly more work is needed in multithreaded code,
such as the S3A committers, which collect statistics across
all threads used in task and job commit operations.
Currently the IOStatisticsContext-aware classes are:
* The S3A input stream, output stream and list iterators.
* RawLocalFileSystem's input and output streams.
* The S3A committers.
* The TaskPool class in hadoop-common, which propagates
the active context into scheduled worker threads.
Collection of statistics in the IOStatisticsContext
is disabled process-wide by default until the feature
is considered stable.
To enable the collection, set the option
fs.thread.level.iostatistics.enabled
to "true" in core-site.xml;
Contributed by Mehakmeet Singh and Steve Loughran
part of HADOOP-18103.
Handling memory fragmentation in S3A vectored IO implementation by
allocating smaller user range requested size buffers and directly
filling them from the remote S3 stream and skipping undesired
data in between ranges.
This patch also adds aborting active vectored reads when stream is
closed or unbuffer() is called.
Contributed By: Mukund Thakur
Part of HADOOP-18103.
Introducing fs.s3a.vectored.read.min.seek.size and fs.s3a.vectored.read.max.merged.size
to configure min seek and max read during a vectored IO operation in S3A connector.
These properties actually define how the ranges will be merged. To completely
disable merging set fs.s3a.max.readsize.vectored.read to 0.
Contributed By: Mukund Thakur
part of HADOOP-18103.
Add support for multiple ranged vectored read api in PositionedReadable.
The default iterates through the ranges to read each synchronously,
but the intent is that FSDataInputStream subclasses can make more
efficient readers especially in object stores implementation.
Also added implementation in S3A where smaller ranges are merged and
sliced byte buffers are returned to the readers. All the merged ranged are
fetched from S3 asynchronously.
Contributed By: Owen O'Malley and Mukund Thakur
Speed up the magic committer with key changes being
* Writes under __magic always retain directory markers
* File creation under __magic skips all overwrite checks,
including the LIST call intended to stop files being
created over dirs.
* mkdirs under __magic probes the path for existence
but does not look any further.
Extra parallelism in task and job commit directory scanning
Use of createFile and openFile with parameters which all for
HEAD checks to be skipped.
The committer can write the summary _SUCCESS file to the path
`fs.s3a.committer.summary.report.directory`, which can be in a
different file system/bucket if desired, using the job id as
the filename.
Also: HADOOP-15460. S3A FS to add `fs.s3a.create.performance`
Application code can set the createFile() option
fs.s3a.create.performance to true to disable the same
safety checks when writing under magic directories.
Use with care.
The createFile option prefix `fs.s3a.create.header.`
can be used to add custom headers to S3 objects when
created.
Contributed by Steve Loughran.
Adds a new option fs.s3a.create.storage.class which can
be used to set the storage class for files created in AWS S3.
Consult the documentation for details and instructions on how
disable the relevant tests when testing against third-party
stores.
Contributed by Monthon Klongklaew
This moves off use of the purged s3a://landsat-pds bucket, so fixing tests
which had started failing.
* Adds a new class, PublicDatasetTestUtils to manage the use of public datasets.
* The new test bucket s3a://usgs-landsat/ is requester pays, so depends upon
HADOOP-14661.
Consult the updated test documentation when running against other S3 stores.
Contributed by Daniel Carl Jones
Change-Id: Ie8585e4d9b67667f8cb80b2970225d79a4f8d257
This moves off use of the purged s3a://landsat-pds bucket, so fixing tests
which had started failing.
* Adds a new class, PublicDatasetTestUtils to manage the use of public datasets.
* The new test bucket s3a://usgs-landsat/ is requester pays, so depends upon
HADOOP-14661.
Consult the updated test documentation when running against other S3 stores.
Contributed by Daniel Carl Jones
S3A input stream support for the few fs.option.openfile settings.
As well as supporting the read policy option and values,
if the file length is declared in fs.option.openfile.length
then no HEAD request will be issued when opening a file.
This can cut a few tens of milliseconds off the operation.
The patch adds a new openfile parameter/FS configuration option
fs.s3a.input.async.drain.threshold (default: 16000).
It declares the number of bytes remaining in the http input stream
above which any operation to read and discard the rest of the stream,
"draining", is executed asynchronously.
This asynchronous draining offers some performance benefit on seek-heavy
file IO.
Contributed by Steve Loughran.
Change-Id: I9b0626bbe635e9fd97ac0f463f5e7167e0111e39
Adds the option fs.s3a.requester.pays.enabled, which, if set to true, allows
the client to access S3 buckets where the requester is billed for the IO.
Contributed by Daniel Carl Jones
Optimize the scan for s3 by performing a deep tree listing,
inferring directory counts from the paths returned.
Contributed by Ahmar Suhail.
Change-Id: I26ffa8c6f65fd11c68a88d6e2243b0eac6ffd024
Multi object delete of size more than 1000 is not supported by S3 and
fails with MalformedXML error. So implementing paging of requests to
reduce the number of keys in a single request. Page size can be configured
using "fs.s3a.bulk.delete.page.size"
Contributed By: Mukund Thakur
Adds a new map type WeakReferenceMap, which stores weak
references to values, and a WeakReferenceThreadMap subclass
to more closely resemble a thread local type, as it is a
map of threadId to value.
Construct it with a factory method and optional callback
for notification on loss and regeneration.
WeakReferenceThreadMap<WrappingAuditSpan> activeSpan =
new WeakReferenceThreadMap<>(
(k) -> getUnbondedSpan(),
this::noteSpanReferenceLost);
This is used in ActiveAuditManagerS3A for span tracking.
Relates to
* HADOOP-17511. Add an Audit plugin point for S3A
* HADOOP-18094. Disable S3A auditing by default.
Contributed by Steve Loughran.
Part of HADOOP-17198. Support S3 Access Points.
HADOOP-18068. "upgrade AWS SDK to 1.12.132" broke the access point endpoint
translation.
Correct endpoints should start with "s3-accesspoint.", after SDK upgrade they start with
"s3.accesspoint-" which messes up tests + region detection by the SDK.
Contributed by Bogdan Stolojan
See HADOOP-18091. S3A auditing leaks memory through ThreadLocal references
* Adds a new option fs.s3a.audit.enabled to controls whether or not auditing
is enabled. This is false by default.
* When false, the S3A auditing manager is NoopAuditManagerS3A,
which was formerly only used for unit tests and
during filsystem initialization.
* When true, ActiveAuditManagerS3A is used for managing auditing,
allowing auditing events to be reported.
* updates documentation and tests.
This patch does not fix the underlying leak. When auditing is enabled,
long-lived threads will retain references to the audit managers
of S3A filesystem instances which have already been closed.
Contributed by Steve Loughran.
Completely removes S3Guard support from the S3A codebase.
If the connector is configured to use any metastore other than
the null and local stores (i.e. DynamoDB is selected) the s3a client
will raise an exception and refuse to initialize.
This is to ensure that there is no mix of S3Guard enabled and disabled
deployments with the same configuration but different hadoop releases
-it must be turned off completely.
The "hadoop s3guard" command has been retained -but the supported
subcommands have been reduced to those which are not purely S3Guard
related: "bucket-info" and "uploads".
This is major change in terms of the number of files
changed; before cherry picking subsequent s3a patches into
older releases, this patch will probably need backporting
first.
Goodbye S3Guard, your work is done. Time to die.
Contributed by Steve Loughran.
This switches the default behavior of S3A output streams
to warning that Syncable.hsync() or hflush() have been
called; it's not considered an error unless the defaults
are overridden.
This avoids breaking applications which call the APIs,
at the risk of people trying to use S3 as a safe store
of streamed data (HBase WALs, audit logs etc).
Contributed by Steve Loughran.
The ordering of the resolution of new and deprecated s3a encryption options & secrets is the same when JCEKS and other hadoop credentials stores are used to store them as
when they are in XML files: per-bucket settings always take priority over global values,
even when the bucket-level options use the old option names.
Contributed by Mehakmeet Singh and Steve Loughran
The option fs.s3a.object.content.encoding declares the content encoding to be set on files when they are written; this is served up in the "Content-Encoding" HTTP header when reading objects back in.
This is useful for people loading the data into other tools in the AWS ecosystem which don't use file extensions to infer compression type (e.g. serving compressed files from S3 or importing into RDS)
Contributed by: Holden Karau
Add support for S3 Access Points. This provides extra security as it
ensures applications are not working with buckets belong to third parties.
To bind a bucket to an access point, set the access point (ap) ARN,
which must be done for each specific bucket, using the pattern
fs.s3a.bucket.$BUCKET.accesspoint.arn = ARN
* The global/bucket option `fs.s3a.accesspoint.required` to
mandate that buckets must declare their access point.
* This is not compatible with S3Guard.
Consult the documentation for further details.
Contributed by Bogdan Stolojan
This migrates the fs.s3a-server-side encryption configuration options
to a name which covers client-side encryption too.
fs.s3a.server-side-encryption-algorithm becomes fs.s3a.encryption.algorithm
fs.s3a.server-side-encryption.key becomes fs.s3a.encryption.key
The existing keys remain valid, simply deprecated and remapped
to the new values. If you want server-side encryption options
to be picked up regardless of hadoop versions, use
the old keys.
(the old key also works for CSE, though as no version of Hadoop
with CSE support has shipped without this remapping, it's less
relevant)
Contributed by: Mehakmeet Singh
* CredentialProviderFactory to detect and report on recursion.
* S3AFS to remove incompatible providers.
* Integration Test for this.
Contributed by Steve Loughran.
Follow on to
* HADOOP-13887. Encrypt S3A data client-side with AWS SDK (S3-CSE)
* HADOOP-17817. S3A to raise IOE if both S3-CSE and S3Guard enabled
If the S3A bucket is set up to use S3-CSE encryption, all tests which turn
on S3Guard are skipped, so they don't raise any exceptions about
incompatible configurations.
Contributed by: Mehakmeet Singh
Fixes the regression caused by HADOOP-17511 by moving where the
option fs.s3a.acl.default is read -doing it before the RequestFactory
is created.
Adds
* A unit test in TestRequestFactory to verify the ACLs are set
on all file write operations.
* A new ITestS3ACannedACLs test which verifies that ACLs really
do get all the way through.
* S3A Assumed Role delegation tokens to include the IAM permission
s3:PutObjectAcl in the generated role.
Contributed by Steve Loughran
This patch cuts down the size of directory trees used for
distcp contract tests against object stores, so making
them much faster against distant/slow stores.
On abfs, the test only runs with -Dscale (as was the case for s3a already),
and has the larger scale test timeout.
After every test case, the FileSystem IOStatistics are logged,
to provide information about what IO is taking place and
what it's performance is.
There are some test cases which upload files of 1+ MiB; you can
increase the size of the upload in the option
"scale.test.distcp.file.size.kb"
Set it to zero and the large file tests are skipped.
Contributed by Steve Loughran.
This improves error handling after multiple failures reading data
-when the read fails and attempts to reconnect() also fail.
Contributed by Bobby Wang.
This work
* Defines the behavior of FileSystem.copyFromLocal in filesystem.md
* Implements a high performance implementation of copyFromLocalOperation
for S3
* Adds a contract test for the operation: AbstractContractCopyFromLocalTest
* Implements the contract tests for Local and S3A FileSystems
Contributed by: Bogdan Stolojan
This (big!) patch adds support for client side encryption in AWS S3,
with keys managed by AWS-KMS.
Read the documentation in encryption.md very, very carefully before
use and consider it unstable.
S3-CSE is enabled in the existing configuration option
"fs.s3a.server-side-encryption-algorithm":
fs.s3a.server-side-encryption-algorithm=CSE-KMS
fs.s3a.server-side-encryption.key=<KMS_KEY_ID>
You cannot enable CSE and SSE in the same client, although
you can still enable a default SSE option in the S3 console.
* Filesystem list/get status operations subtract 16 bytes from the length
of all files >= 16 bytes long to compensate for the padding which CSE
adds.
* The SDK always warns about the specific algorithm chosen being
deprecated. It is critical to use this algorithm for ranged
GET requests to work (i.e. random IO). Ignore.
* Unencrypted files CANNOT BE READ.
The entire bucket SHOULD be encrypted with S3-CSE.
* Uploading files may be a bit slower as blocks are now
written sequentially.
* The Multipart Upload API is disabled when S3-CSE is active.
Contributed by Mehakmeet Singh
Some network exceptions can raise SdkClientException with message
`Data read has a different length than the expected`.
These should be recoverable.
Contributed by Bogdan Stolojan
This addresses the regression in Hadoop 3.3.1 where if no S3 endpoint
is set in fs.s3a.endpoint, S3A filesystem creation may fail on
non-EC2 deployments, depending on the local host environment setup.
* If fs.s3a.endpoint is empty/null, and fs.s3a.endpoint.region
is null, the region is set to "us-east-1".
* If fs.s3a.endpoint.region is explicitly set to "" then the client
falls back to the SDK region resolution chain; this works on EC2
* Details in troubleshooting.md, including a workaround for Hadoop-3.3.1+
* Also contains some minor restructuring of troubleshooting.md
Contributed by Steve Loughran.
The S3A connector supports
"an auditor", a plugin which is invoked
at the start of every filesystem API call,
and whose issued "audit span" provides a context
for all REST operations against the S3 object store.
The standard auditor sets the HTTP Referrer header
on the requests with information about the API call,
such as process ID, operation name, path,
and even job ID.
If the S3 bucket is configured to log requests, this
information will be preserved there and so can be used
to analyze and troubleshoot storage IO.
Contributed by Steve Loughran.
The option `fs.s3a.endpoint.region` can be used
to explicitly set the AWS region of a bucket.
This is needed when using AWS Private Link, as
the region cannot be automatically determined.
Contributed by Mehakmeet Singh
When the S3A and ABFS filesystems are closed,
their IOStatistics are logged at debug in the log:
org.apache.hadoop.fs.statistics.IOStatisticsLogging
Set `fs.iostatistics.logging.level` to `info` for the statistics
to be logged at info. (also: `warn` or `error` for even higher
log levels).
Contributed by: Mehakmeet Singh
Followup to HADOOP-13327, which changed S3A output stream hsync/hflush calls
to raise an exception.
Adds a new option fs.s3a.downgrade.syncable.exceptions
When true, calls to Syncable hsync/hflush on S3A output streams will
log once at warn (for entire process life, not just the stream), then
increment IOStats with the relevant operation counter
With the downgrade option false (default)
* IOStats are incremented
* The UnsupportedOperationException current raised includes a link to the
JIRA.
Contributed by Steve Loughran.
Moves to the builder API for AWS S3 client creation, and
offers a similar style of API to the S3A FileSystem and tests, hiding
the details of which options are client, which are in AWS Conf,
and doing the wiring up of S3A statistics interfaces to the AWS
SDK internals. S3A Statistics, including IOStatistics, should now
count throttling events handled in the AWS SDK itself.
This patch restores endpoint determination by probes to US-East-1
if the client isn't configured with fs.s3a.endpoint.
Explicitly setting the endpoint will save the cost of these probe
HTTP requests.
Contributed by Steve Loughran.
The S3A connector's rename() operation now raises FileNotFoundException if
the source doesn't exist; a FileAlreadyExistsException if the destination
exists and is unsuitable for the source file/directory.
When renaming to a path which does not exist, the connector no longer checks
for the destination parent directory existing -instead it simply verifies
that there is no file immediately above the destination path.
This is needed to avoid race conditions with delete() and rename()
calls working on adjacent subdirectories.
Contributed by Steve Loughran.
Removed findbugs from the hadoop build images and added spotbugs instead.
Upgraded SpotBugs to 4.2.2 and spotbugs-maven-plugin to 4.2.0.
Reviewed-by: Masatake Iwasaki <iwasakims@apache.org>
Use spotbugs instead of findbugs. Removed findbugs from the hadoop build images,
and added spotbugs in the images instead.
Reviewed-by: Masatake Iwasaki <iwasakims@apache.org>
Reviewed-by: Inigo Goiri <inigoiri@apache.org>
Reviewed-by: Dinesh Chitlangia <dineshc@apache.org>
Adds an Abortable.abort() interface for streams to enable output streams to be terminated; this
is implemented by the S3A connector's output stream. It allows for commit protocols
to be implemented which commit/abort work by writing to the final destination and
using the abort() call to cancel any write which is not intended to be committed.
Consult the specification document for information about the interface and its use.
Contributed by Jungtaek Lim and Steve Loughran.
This defines what output streams and especially those which implement
Syncable are meant to do, and documents where implementations (HDFS; S3)
don't. With tests.
The file:// FileSystem now supports Syncable if an application calls
FileSystem.setWriteChecksum(false) before creating a file -checksumming
and Syncable.hsync() are incompatible.
Contributed by Steve Loughran.
* core-default.xml updated so that fs.s3a.committer.magic.enabled = true
* CommitConstants updated to match
* All tests which previously enabled the magic committer now rely on
default settings. This helps make sure it is enabled.
* Docs cover the switch, mention its enabled and explain why you may
want to disable it.
Note: this doesn't switch to using the committer -it just enables the path
rewriting magic which it depends on.
Contributed by Steve Loughran.
Caused by HADOOP-16830 and HADOOP-17271.
Fixes tests which fail intermittently based on configs and
in the case of the HugeFile tests, bulk runs with existing
FS instances meant statistic probes sometimes ended up probing those
of a previous FS.
Contributed by Steve Loughran.
Change-Id: I65ba3f44444e59d298df25ac5c8dc5a8781dfb7d
Caused by HADOOP-16380 and HADOOP-17271.
Fixes tests which fail intermittently based on configs and
in the case of the HugeFile tests, bulk runs with existing
FS instances meant statistic probes sometimes ended up probing those
of a previous FS.
Contributed by Steve Loughran.
Also fixes HADOOP-16995. ITestS3AConfiguration proxy tests failures when bucket probes == 0
The improvement should include the fix, ebcause the test would fail by default otherwise.
Change-Id: I9a7e4b5e6d4391ebba096c15e84461c038a2ec59
S3A connector to support the IOStatistics API of HADOOP-16830,
This is a major rework of the S3A Statistics collection to
* Embrace the IOStatistics APIs
* Move from direct references of S3AInstrumention statistics
collectors to interface/implementation classes in new packages.
* Ubiquitous support of IOStatistics, including:
S3AFileSystem, input and output streams, RemoteIterator instances
provided in list calls.
* Adoption of new statistic names from hadoop-common
Regarding statistic collection, as well as all existing
statistics, the connector now records min/max/mean durations
of HTTP GET and HEAD requests, and those of LIST operations.
Contributed by Steve Loughran.
The addition of deprecated S3A configuration options in HADOOP-17318
triggered a reload of default (xml resource) configurations, which breaks
tests which fail if there's a per-bucket setting inconsistent with test
setup.
Creating an S3AFS instance before creating the Configuration() instance
for test runs gets that reload out the way before test setup takes
place.
Along with the fix, extra changes in the failing test suite to fail
fast when marker policy isn't as expected, and to log FS state better.
Rather than create and discard an instance, add a new static method
to S3AFS and invoke it in test setup. This forces the load
Change-Id: Id52b1c46912c6fedd2ae270e2b1eb2222a360329
This adds a semaphore to throttle the number of FileSystem instances which
can be created simultaneously, set in "fs.creation.parallel.count".
This is designed to reduce the impact of many threads in an application calling
FileSystem.get() on a filesystem which takes time to instantiate -for example
to an object where HTTPS connections are set up during initialization.
Many threads trying to do this may create spurious delays by conflicting
for access to synchronized blocks, when simply limiting the parallelism
diminishes the conflict, so speeds up all threads trying to access
the store.
The default value, 64, is larger than is likely to deliver any speedup -but
it does mean that there should be no adverse effects from the change.
If a service appears to be blocking on all threads initializing connections to
abfs, s3a or store, try a smaller (possibly significantly smaller) value.
Contributed by Steve Loughran.
This patch
* fixes the inversion
* adds a precondition check
* if the commands are supplied inverted, swaps them with a warning.
This is to stop breaking any tests written to cope with the existing
behavior.
Contributed by Steve Loughran
See also [SPARK-33402]: Jobs launched in same second have duplicate MapReduce JobIDs
Contributed by Steve Loughran.
Change-Id: Iae65333cddc84692997aae5d902ad8765b45772a
