The S3A connector's rename() operation now raises FileNotFoundException if
the source doesn't exist; a FileAlreadyExistsException if the destination
exists and is unsuitable for the source file/directory.
When renaming to a path which does not exist, the connector no longer checks
for the destination parent directory existing -instead it simply verifies
that there is no file immediately above the destination path.
This is needed to avoid race conditions with delete() and rename()
calls working on adjacent subdirectories.
Contributed by Steve Loughran.
Removed findbugs from the hadoop build images and added spotbugs instead.
Upgraded SpotBugs to 4.2.2 and spotbugs-maven-plugin to 4.2.0.
Reviewed-by: Masatake Iwasaki <iwasakims@apache.org>
Use spotbugs instead of findbugs. Removed findbugs from the hadoop build images,
and added spotbugs in the images instead.
Reviewed-by: Masatake Iwasaki <iwasakims@apache.org>
Reviewed-by: Inigo Goiri <inigoiri@apache.org>
Reviewed-by: Dinesh Chitlangia <dineshc@apache.org>
Adds an Abortable.abort() interface for streams to enable output streams to be terminated; this
is implemented by the S3A connector's output stream. It allows for commit protocols
to be implemented which commit/abort work by writing to the final destination and
using the abort() call to cancel any write which is not intended to be committed.
Consult the specification document for information about the interface and its use.
Contributed by Jungtaek Lim and Steve Loughran.
This defines what output streams and especially those which implement
Syncable are meant to do, and documents where implementations (HDFS; S3)
don't. With tests.
The file:// FileSystem now supports Syncable if an application calls
FileSystem.setWriteChecksum(false) before creating a file -checksumming
and Syncable.hsync() are incompatible.
Contributed by Steve Loughran.
* core-default.xml updated so that fs.s3a.committer.magic.enabled = true
* CommitConstants updated to match
* All tests which previously enabled the magic committer now rely on
default settings. This helps make sure it is enabled.
* Docs cover the switch, mention its enabled and explain why you may
want to disable it.
Note: this doesn't switch to using the committer -it just enables the path
rewriting magic which it depends on.
Contributed by Steve Loughran.
Caused by HADOOP-16830 and HADOOP-17271.
Fixes tests which fail intermittently based on configs and
in the case of the HugeFile tests, bulk runs with existing
FS instances meant statistic probes sometimes ended up probing those
of a previous FS.
Contributed by Steve Loughran.
Change-Id: I65ba3f44444e59d298df25ac5c8dc5a8781dfb7d
Caused by HADOOP-16380 and HADOOP-17271.
Fixes tests which fail intermittently based on configs and
in the case of the HugeFile tests, bulk runs with existing
FS instances meant statistic probes sometimes ended up probing those
of a previous FS.
Contributed by Steve Loughran.
Also fixes HADOOP-16995. ITestS3AConfiguration proxy tests failures when bucket probes == 0
The improvement should include the fix, ebcause the test would fail by default otherwise.
Change-Id: I9a7e4b5e6d4391ebba096c15e84461c038a2ec59
S3A connector to support the IOStatistics API of HADOOP-16830,
This is a major rework of the S3A Statistics collection to
* Embrace the IOStatistics APIs
* Move from direct references of S3AInstrumention statistics
collectors to interface/implementation classes in new packages.
* Ubiquitous support of IOStatistics, including:
S3AFileSystem, input and output streams, RemoteIterator instances
provided in list calls.
* Adoption of new statistic names from hadoop-common
Regarding statistic collection, as well as all existing
statistics, the connector now records min/max/mean durations
of HTTP GET and HEAD requests, and those of LIST operations.
Contributed by Steve Loughran.
The addition of deprecated S3A configuration options in HADOOP-17318
triggered a reload of default (xml resource) configurations, which breaks
tests which fail if there's a per-bucket setting inconsistent with test
setup.
Creating an S3AFS instance before creating the Configuration() instance
for test runs gets that reload out the way before test setup takes
place.
Along with the fix, extra changes in the failing test suite to fail
fast when marker policy isn't as expected, and to log FS state better.
Rather than create and discard an instance, add a new static method
to S3AFS and invoke it in test setup. This forces the load
Change-Id: Id52b1c46912c6fedd2ae270e2b1eb2222a360329
This adds a semaphore to throttle the number of FileSystem instances which
can be created simultaneously, set in "fs.creation.parallel.count".
This is designed to reduce the impact of many threads in an application calling
FileSystem.get() on a filesystem which takes time to instantiate -for example
to an object where HTTPS connections are set up during initialization.
Many threads trying to do this may create spurious delays by conflicting
for access to synchronized blocks, when simply limiting the parallelism
diminishes the conflict, so speeds up all threads trying to access
the store.
The default value, 64, is larger than is likely to deliver any speedup -but
it does mean that there should be no adverse effects from the change.
If a service appears to be blocking on all threads initializing connections to
abfs, s3a or store, try a smaller (possibly significantly smaller) value.
Contributed by Steve Loughran.
This patch
* fixes the inversion
* adds a precondition check
* if the commands are supplied inverted, swaps them with a warning.
This is to stop breaking any tests written to cope with the existing
behavior.
Contributed by Steve Loughran
See also [SPARK-33402]: Jobs launched in same second have duplicate MapReduce JobIDs
Contributed by Steve Loughran.
Change-Id: Iae65333cddc84692997aae5d902ad8765b45772a
This fixes the S3Guard/Directory Marker Retention integration so that when
fs.s3a.directory.marker.retention=keep, failures during multipart delete
are handled correctly, as are incremental deletes during
directory tree operations.
In both cases, when a directory marker with children is deleted from
S3, the directory entry in S3Guard is not deleted, because it is still
critical to representing the structure of the store.
Contributed by Steve Loughran.
Change-Id: I4ca133a23ea582cd42ec35dbf2dc85b286297d2f
Unless you explicitly set it, the issue date of a delegation token identifier is 0, which confuses spark renewal (SPARK-33440). This patch makes sure that all S3A DT identifiers have the current time as issue date, fixing the problem as far as S3A tokens are concerned.
Contributed by Jungtaek Lim.
This reverts changes in HADOOP-13230 to use S3Guard TTL in choosing when
to issue a HEAD request; fixing tests to compensate.
New org.apache.hadoop.fs.s3a.performance.OperationCost cost,
S3GUARD_NONAUTH_FILE_STATUS_PROBE for use in cost tests.
Contributed by Steve Loughran.
Change-Id: I418d55d2d2562a48b2a14ec7dee369db49b4e29e
S3AFileSystem.listStatus() is optimized for invocations
where the path supplied is a non-empty directory.
The number of S3 requests is significantly reduced, saving
time, money, and reducing the risk of S3 throttling.
Contributed by Mukund Thakur.
This changes directory tree deletion so that only files are incrementally deleted
from S3Guard after the objects are deleted; the directories are left alone
until metadataStore.deleteSubtree(path) is invoke.
This avoids directory tombstones being added above files/child directories,
which stop the treewalk and delete phase from working.
Also:
* Callback to delete objects splits files and dirs so that
any problems deleting the dirs doesn't trigger s3guard updates
* New statistic to measure #of objects deleted, alongside request count.
* Callback listFilesAndEmptyDirectories renamed listFilesAndDirectoryMarkers
to clarify behavior.
* Test enhancements to replicate the failure and verify the fix
Contributed by Steve Loughran
Now skips ITestS3AEncryptionWithDefaultS3Settings.testEncryptionOverRename
when server side encryption is not set to sse:kms
Contributed by Mukund Thakur
This adds an option to disable "empty directory" marker deletion,
so avoid throttling and other scale problems.
This feature is *not* backwards compatible.
Consult the documentation and use with care.
Contributed by Steve Loughran.
Change-Id: I69a61e7584dc36e485d5e39ff25b1e3e559a1958
