This (big!) patch adds support for client side encryption in AWS S3,
with keys managed by AWS-KMS.
Read the documentation in encryption.md very, very carefully before
use and consider it unstable.
S3-CSE is enabled in the existing configuration option
"fs.s3a.server-side-encryption-algorithm":
fs.s3a.server-side-encryption-algorithm=CSE-KMS
fs.s3a.server-side-encryption.key=<KMS_KEY_ID>
You cannot enable CSE and SSE in the same client, although
you can still enable a default SSE option in the S3 console.
* Filesystem list/get status operations subtract 16 bytes from the length
of all files >= 16 bytes long to compensate for the padding which CSE
adds.
* The SDK always warns about the specific algorithm chosen being
deprecated. It is critical to use this algorithm for ranged
GET requests to work (i.e. random IO). Ignore.
* Unencrypted files CANNOT BE READ.
The entire bucket SHOULD be encrypted with S3-CSE.
* Uploading files may be a bit slower as blocks are now
written sequentially.
* The Multipart Upload API is disabled when S3-CSE is active.
Contributed by Mehakmeet Singh
Change-Id: Ie1a27a036a39db66a67e9c6d33bc78d54ea708a0
Addresses the problem of processes running out of memory when
there are many ABFS output streams queuing data to upload,
especially when the network upload bandwidth is less than the rate
data is generated.
ABFS Output streams now buffer their blocks of data to
"disk", "bytebuffer" or "array", as set in
"fs.azure.data.blocks.buffer"
When buffering via disk, the location for temporary storage
is set in "fs.azure.buffer.dir"
For safe scaling: use "disk" (default); for performance, when
confident that upload bandwidth will never be a bottleneck,
experiment with the memory options.
The number of blocks a single stream can have queued for uploading
is set in "fs.azure.block.upload.active.blocks".
The default value is 20.
Contributed by Mehakmeet Singh.
* CredentialProviderFactory to detect and report on recursion.
* S3AFS to remove incompatible providers.
* Integration Test for this.
Contributed by Steve Loughran.
Change-Id: Ia247b3c9fe8488ffdb7f57b40eb6e37c57e522ef
Fixes the regression caused by HADOOP-17511 by moving where the
option fs.s3a.acl.default is read -doing it before the RequestFactory
is created.
Adds
* A unit test in TestRequestFactory to verify the ACLs are set
on all file write operations.
* A new ITestS3ACannedACLs test which verifies that ACLs really
do get all the way through.
* S3A Assumed Role delegation tokens to include the IAM permission
s3:PutObjectAcl in the generated role.
Contributed by Steve Loughran
Change-Id: I3abac6a1b9e150b6b6df0af7c2c70093f8f518cb
This patch cuts down the size of directory trees used for
distcp contract tests against object stores, so making
them much faster against distant/slow stores.
On abfs, the test only runs with -Dscale (as was the case for s3a already),
and has the larger scale test timeout.
After every test case, the FileSystem IOStatistics are logged,
to provide information about what IO is taking place and
what it's performance is.
There are some test cases which upload files of 1+ MiB; you can
increase the size of the upload in the option
"scale.test.distcp.file.size.kb"
Set it to zero and the large file tests are skipped.
Contributed by Steve Loughran.
This improves error handling after multiple failures reading data
-when the read fails and attempts to reconnect() also fail.
Contributed by Bobby Wang.
Change-Id: If17dee395ad6b9b7c738021bad20d0a13eb4011e
This work
* Defines the behavior of FileSystem.copyFromLocal in filesystem.md
* Implements a high performance implementation of copyFromLocalOperation
for S3
* Adds a contract test for the operation: AbstractContractCopyFromLocalTest
* Implements the contract tests for Local and S3A FileSystems
Contributed by: Bogdan Stolojan
Change-Id: I25d502102775c3626c4264e5a14c649879730050
Some network exceptions can raise SdkClientException with message
`Data read has a different length than the expected`.
These should be recoverable.
Contributed by Bogdan Stolojan
Change-Id: Ia22fd77d90971e9e02b4f947398a4749eebe5909
Introducing fs.azure.readahead.range parameter which can be set by the user.
Data will be populated in buffer for random reads as well which leads to fewer
remote calls.
This patch also changes the seek implementation to perform a lazy seek. The
actual seek is done when a read is initiated and data is not present in the buffer else
data is returned from the buffer thus reducing the number of remote storage calls.
Contributed By: Mukund Thakur
Change-Id: Ib920eedd0087caa150afa4d4c23e89df56b29e83
This addresses the regression in Hadoop 3.3.1 where if no S3 endpoint
is set in fs.s3a.endpoint, S3A filesystem creation may fail on
non-EC2 deployments, depending on the local host environment setup.
* If fs.s3a.endpoint is empty/null, and fs.s3a.endpoint.region
is null, the region is set to "us-east-1".
* If fs.s3a.endpoint.region is explicitly set to "" then the client
falls back to the SDK region resolution chain; this works on EC2
* Details in troubleshooting.md, including a workaround for Hadoop-3.3.1+
* Also contains some minor restructuring of troubleshooting.md
Contributed by Steve Loughran.
Change-Id: Ife482cff513307cd52d59eec56beac0a33e031f5
The S3A connector supports
"an auditor", a plugin which is invoked
at the start of every filesystem API call,
and whose issued "audit span" provides a context
for all REST operations against the S3 object store.
The standard auditor sets the HTTP Referrer header
on the requests with information about the API call,
such as process ID, operation name, path,
and even job ID.
If the S3 bucket is configured to log requests, this
information will be preserved there and so can be used
to analyze and troubleshoot storage IO.
Contributed by Steve Loughran.
Change-Id: Ic0a105c194342ed2d529833ecc42608e8ba2f258
The option `fs.s3a.endpoint.region` can be used
to explicitly set the AWS region of a bucket.
This is needed when using AWS Private Link, as
the region cannot be automatically determined.
Contributed by Mehakmeet Singh
Change-Id: I4b52f85d7af0ddd56b2b0505ac0124d4fcc67ca0
When the S3A and ABFS filesystems are closed,
their IOStatistics are logged at debug in the log:
org.apache.hadoop.fs.statistics.IOStatisticsLogging
Set `fs.iostatistics.logging.level` to `info` for the statistics
to be logged at info. (also: `warn` or `error` for even higher
log levels).
Contributed by: Mehakmeet Singh
Change-Id: I56d44ad89fc1c0dd4baf701681834e7fd96c544f
Followup to HADOOP-13327, which changed S3A output stream hsync/hflush calls
to raise an exception.
Adds a new option fs.s3a.downgrade.syncable.exceptions
When true, calls to Syncable hsync/hflush on S3A output streams will
log once at warn (for entire process life, not just the stream), then
increment IOStats with the relevant operation counter
With the downgrade option false (default)
* IOStats are incremented
* The UnsupportedOperationException current raised includes a link to the
JIRA.
Contributed by Steve Loughran.
Change-Id: I967e077eda1d1a1a3795b4d22e003fe7997b6679
Also fixes HADOOP-16995. ITestS3AConfiguration proxy tests failures when bucket probes == 0
The improvement should include the fix, because the test would fail by default otherwise.
Change-Id: I9a7e4b5e6d4391ebba096c15e84461c038a2ec59
A regression caused by HADOOP-17022: the reduction in LIST calls broken an assertion.
Contributed by Mukund Thakur
Change-Id: Ib9725165906931634567fd1f62a81e3a6ea5620c
The ABFS Filesystem and its input and output streams now implement
the IOStatisticSource interface and provide IOStatistics on
their interactions with Azure Storage.
This includes the min/max/mean durations of all REST API calls.
Contributed by Mehakmeet Singh <mehakmeet.singh@cloudera.com>
This moves the mock account name --which is required to never exist-- from
"mockAccount" to an account name containing a static UUID.
Contributed by Steve Loughran.
