Fixes the regression caused by HADOOP-17511 by moving where the
option fs.s3a.acl.default is read -doing it before the RequestFactory
is created.
Adds
* A unit test in TestRequestFactory to verify the ACLs are set
on all file write operations.
* A new ITestS3ACannedACLs test which verifies that ACLs really
do get all the way through.
* S3A Assumed Role delegation tokens to include the IAM permission
s3:PutObjectAcl in the generated role.
Contributed by Steve Loughran
This patch cuts down the size of directory trees used for
distcp contract tests against object stores, so making
them much faster against distant/slow stores.
On abfs, the test only runs with -Dscale (as was the case for s3a already),
and has the larger scale test timeout.
After every test case, the FileSystem IOStatistics are logged,
to provide information about what IO is taking place and
what it's performance is.
There are some test cases which upload files of 1+ MiB; you can
increase the size of the upload in the option
"scale.test.distcp.file.size.kb"
Set it to zero and the large file tests are skipped.
Contributed by Steve Loughran.
This improves error handling after multiple failures reading data
-when the read fails and attempts to reconnect() also fail.
Contributed by Bobby Wang.
This work
* Defines the behavior of FileSystem.copyFromLocal in filesystem.md
* Implements a high performance implementation of copyFromLocalOperation
for S3
* Adds a contract test for the operation: AbstractContractCopyFromLocalTest
* Implements the contract tests for Local and S3A FileSystems
Contributed by: Bogdan Stolojan
This (big!) patch adds support for client side encryption in AWS S3,
with keys managed by AWS-KMS.
Read the documentation in encryption.md very, very carefully before
use and consider it unstable.
S3-CSE is enabled in the existing configuration option
"fs.s3a.server-side-encryption-algorithm":
fs.s3a.server-side-encryption-algorithm=CSE-KMS
fs.s3a.server-side-encryption.key=<KMS_KEY_ID>
You cannot enable CSE and SSE in the same client, although
you can still enable a default SSE option in the S3 console.
* Filesystem list/get status operations subtract 16 bytes from the length
of all files >= 16 bytes long to compensate for the padding which CSE
adds.
* The SDK always warns about the specific algorithm chosen being
deprecated. It is critical to use this algorithm for ranged
GET requests to work (i.e. random IO). Ignore.
* Unencrypted files CANNOT BE READ.
The entire bucket SHOULD be encrypted with S3-CSE.
* Uploading files may be a bit slower as blocks are now
written sequentially.
* The Multipart Upload API is disabled when S3-CSE is active.
Contributed by Mehakmeet Singh
Some network exceptions can raise SdkClientException with message
`Data read has a different length than the expected`.
These should be recoverable.
Contributed by Bogdan Stolojan
This addresses the regression in Hadoop 3.3.1 where if no S3 endpoint
is set in fs.s3a.endpoint, S3A filesystem creation may fail on
non-EC2 deployments, depending on the local host environment setup.
* If fs.s3a.endpoint is empty/null, and fs.s3a.endpoint.region
is null, the region is set to "us-east-1".
* If fs.s3a.endpoint.region is explicitly set to "" then the client
falls back to the SDK region resolution chain; this works on EC2
* Details in troubleshooting.md, including a workaround for Hadoop-3.3.1+
* Also contains some minor restructuring of troubleshooting.md
Contributed by Steve Loughran.
The S3A connector supports
"an auditor", a plugin which is invoked
at the start of every filesystem API call,
and whose issued "audit span" provides a context
for all REST operations against the S3 object store.
The standard auditor sets the HTTP Referrer header
on the requests with information about the API call,
such as process ID, operation name, path,
and even job ID.
If the S3 bucket is configured to log requests, this
information will be preserved there and so can be used
to analyze and troubleshoot storage IO.
Contributed by Steve Loughran.
The option `fs.s3a.endpoint.region` can be used
to explicitly set the AWS region of a bucket.
This is needed when using AWS Private Link, as
the region cannot be automatically determined.
Contributed by Mehakmeet Singh
When the S3A and ABFS filesystems are closed,
their IOStatistics are logged at debug in the log:
org.apache.hadoop.fs.statistics.IOStatisticsLogging
Set `fs.iostatistics.logging.level` to `info` for the statistics
to be logged at info. (also: `warn` or `error` for even higher
log levels).
Contributed by: Mehakmeet Singh
Followup to HADOOP-13327, which changed S3A output stream hsync/hflush calls
to raise an exception.
Adds a new option fs.s3a.downgrade.syncable.exceptions
When true, calls to Syncable hsync/hflush on S3A output streams will
log once at warn (for entire process life, not just the stream), then
increment IOStats with the relevant operation counter
With the downgrade option false (default)
* IOStats are incremented
* The UnsupportedOperationException current raised includes a link to the
JIRA.
Contributed by Steve Loughran.
Moves to the builder API for AWS S3 client creation, and
offers a similar style of API to the S3A FileSystem and tests, hiding
the details of which options are client, which are in AWS Conf,
and doing the wiring up of S3A statistics interfaces to the AWS
SDK internals. S3A Statistics, including IOStatistics, should now
count throttling events handled in the AWS SDK itself.
This patch restores endpoint determination by probes to US-East-1
if the client isn't configured with fs.s3a.endpoint.
Explicitly setting the endpoint will save the cost of these probe
HTTP requests.
Contributed by Steve Loughran.
The S3A connector's rename() operation now raises FileNotFoundException if
the source doesn't exist; a FileAlreadyExistsException if the destination
exists and is unsuitable for the source file/directory.
When renaming to a path which does not exist, the connector no longer checks
for the destination parent directory existing -instead it simply verifies
that there is no file immediately above the destination path.
This is needed to avoid race conditions with delete() and rename()
calls working on adjacent subdirectories.
Contributed by Steve Loughran.
Removed findbugs from the hadoop build images and added spotbugs instead.
Upgraded SpotBugs to 4.2.2 and spotbugs-maven-plugin to 4.2.0.
Reviewed-by: Masatake Iwasaki <iwasakims@apache.org>
Use spotbugs instead of findbugs. Removed findbugs from the hadoop build images,
and added spotbugs in the images instead.
Reviewed-by: Masatake Iwasaki <iwasakims@apache.org>
Reviewed-by: Inigo Goiri <inigoiri@apache.org>
Reviewed-by: Dinesh Chitlangia <dineshc@apache.org>
Adds an Abortable.abort() interface for streams to enable output streams to be terminated; this
is implemented by the S3A connector's output stream. It allows for commit protocols
to be implemented which commit/abort work by writing to the final destination and
using the abort() call to cancel any write which is not intended to be committed.
Consult the specification document for information about the interface and its use.
Contributed by Jungtaek Lim and Steve Loughran.
This defines what output streams and especially those which implement
Syncable are meant to do, and documents where implementations (HDFS; S3)
don't. With tests.
The file:// FileSystem now supports Syncable if an application calls
FileSystem.setWriteChecksum(false) before creating a file -checksumming
and Syncable.hsync() are incompatible.
Contributed by Steve Loughran.
* core-default.xml updated so that fs.s3a.committer.magic.enabled = true
* CommitConstants updated to match
* All tests which previously enabled the magic committer now rely on
default settings. This helps make sure it is enabled.
* Docs cover the switch, mention its enabled and explain why you may
want to disable it.
Note: this doesn't switch to using the committer -it just enables the path
rewriting magic which it depends on.
Contributed by Steve Loughran.
Caused by HADOOP-16830 and HADOOP-17271.
Fixes tests which fail intermittently based on configs and
in the case of the HugeFile tests, bulk runs with existing
FS instances meant statistic probes sometimes ended up probing those
of a previous FS.
Contributed by Steve Loughran.
Change-Id: I65ba3f44444e59d298df25ac5c8dc5a8781dfb7d
Caused by HADOOP-16380 and HADOOP-17271.
Fixes tests which fail intermittently based on configs and
in the case of the HugeFile tests, bulk runs with existing
FS instances meant statistic probes sometimes ended up probing those
of a previous FS.
Contributed by Steve Loughran.
Also fixes HADOOP-16995. ITestS3AConfiguration proxy tests failures when bucket probes == 0
The improvement should include the fix, ebcause the test would fail by default otherwise.
Change-Id: I9a7e4b5e6d4391ebba096c15e84461c038a2ec59
S3A connector to support the IOStatistics API of HADOOP-16830,
This is a major rework of the S3A Statistics collection to
* Embrace the IOStatistics APIs
* Move from direct references of S3AInstrumention statistics
collectors to interface/implementation classes in new packages.
* Ubiquitous support of IOStatistics, including:
S3AFileSystem, input and output streams, RemoteIterator instances
provided in list calls.
* Adoption of new statistic names from hadoop-common
Regarding statistic collection, as well as all existing
statistics, the connector now records min/max/mean durations
of HTTP GET and HEAD requests, and those of LIST operations.
Contributed by Steve Loughran.
The addition of deprecated S3A configuration options in HADOOP-17318
triggered a reload of default (xml resource) configurations, which breaks
tests which fail if there's a per-bucket setting inconsistent with test
setup.
Creating an S3AFS instance before creating the Configuration() instance
for test runs gets that reload out the way before test setup takes
place.
Along with the fix, extra changes in the failing test suite to fail
fast when marker policy isn't as expected, and to log FS state better.
Rather than create and discard an instance, add a new static method
to S3AFS and invoke it in test setup. This forces the load
Change-Id: Id52b1c46912c6fedd2ae270e2b1eb2222a360329
This adds a semaphore to throttle the number of FileSystem instances which
can be created simultaneously, set in "fs.creation.parallel.count".
This is designed to reduce the impact of many threads in an application calling
FileSystem.get() on a filesystem which takes time to instantiate -for example
to an object where HTTPS connections are set up during initialization.
Many threads trying to do this may create spurious delays by conflicting
for access to synchronized blocks, when simply limiting the parallelism
diminishes the conflict, so speeds up all threads trying to access
the store.
The default value, 64, is larger than is likely to deliver any speedup -but
it does mean that there should be no adverse effects from the change.
If a service appears to be blocking on all threads initializing connections to
abfs, s3a or store, try a smaller (possibly significantly smaller) value.
Contributed by Steve Loughran.
This patch
* fixes the inversion
* adds a precondition check
* if the commands are supplied inverted, swaps them with a warning.
This is to stop breaking any tests written to cope with the existing
behavior.
Contributed by Steve Loughran
See also [SPARK-33402]: Jobs launched in same second have duplicate MapReduce JobIDs
Contributed by Steve Loughran.
Change-Id: Iae65333cddc84692997aae5d902ad8765b45772a
This fixes the S3Guard/Directory Marker Retention integration so that when
fs.s3a.directory.marker.retention=keep, failures during multipart delete
are handled correctly, as are incremental deletes during
directory tree operations.
In both cases, when a directory marker with children is deleted from
S3, the directory entry in S3Guard is not deleted, because it is still
critical to representing the structure of the store.
Contributed by Steve Loughran.
Change-Id: I4ca133a23ea582cd42ec35dbf2dc85b286297d2f
Unless you explicitly set it, the issue date of a delegation token identifier is 0, which confuses spark renewal (SPARK-33440). This patch makes sure that all S3A DT identifiers have the current time as issue date, fixing the problem as far as S3A tokens are concerned.
Contributed by Jungtaek Lim.
This reverts changes in HADOOP-13230 to use S3Guard TTL in choosing when
to issue a HEAD request; fixing tests to compensate.
New org.apache.hadoop.fs.s3a.performance.OperationCost cost,
S3GUARD_NONAUTH_FILE_STATUS_PROBE for use in cost tests.
Contributed by Steve Loughran.
Change-Id: I418d55d2d2562a48b2a14ec7dee369db49b4e29e
S3AFileSystem.listStatus() is optimized for invocations
where the path supplied is a non-empty directory.
The number of S3 requests is significantly reduced, saving
time, money, and reducing the risk of S3 throttling.
Contributed by Mukund Thakur.
This changes directory tree deletion so that only files are incrementally deleted
from S3Guard after the objects are deleted; the directories are left alone
until metadataStore.deleteSubtree(path) is invoke.
This avoids directory tombstones being added above files/child directories,
which stop the treewalk and delete phase from working.
Also:
* Callback to delete objects splits files and dirs so that
any problems deleting the dirs doesn't trigger s3guard updates
* New statistic to measure #of objects deleted, alongside request count.
* Callback listFilesAndEmptyDirectories renamed listFilesAndDirectoryMarkers
to clarify behavior.
* Test enhancements to replicate the failure and verify the fix
Contributed by Steve Loughran
Now skips ITestS3AEncryptionWithDefaultS3Settings.testEncryptionOverRename
when server side encryption is not set to sse:kms
Contributed by Mukund Thakur
This adds an option to disable "empty directory" marker deletion,
so avoid throttling and other scale problems.
This feature is *not* backwards compatible.
Consult the documentation and use with care.
Contributed by Steve Loughran.
Change-Id: I69a61e7584dc36e485d5e39ff25b1e3e559a1958
Contributed by Steve Loughran.
Fixes a condition which can cause job commit to fail if a task was
aborted < 60s before the job commit commenced: the task abort
will shut down the thread pool with a hard exit after 60s; the
job commit POST requests would be scheduled through the same pool,
so be interrupted and fail. At present the access is synchronized,
but presumably the executor shutdown code is calling wait() and releasing
locks.
Task abort is triggered from the AM when task attempts succeed but
there are still active speculative task attempts running. Thus it
only surfaces when speculation is enabled and the final tasks are
speculating, which, given they are the stragglers, is not unheard of.
Note: this problem has never been seen in production; it has surfaced
in the hadoop-aws tests on a heavily overloaded desktop
Contributed by Steve Loughran.
S3A delegation token providers will be asked for any additional
token issuers, an array can be returned,
each one will be asked for tokens when DelegationTokenIssuer collects
all the tokens for a filesystem.
Contributed by Mukund Thakur and Steve Loughran.
This patch ensures that writes to S3A fail when more than 10,000 blocks are
written. That upper bound still exists. To write massive files, make sure
that the value of fs.s3a.multipart.size is set to a size which is large
enough to upload the files in fewer than 10,000 blocks.
Change-Id: Icec604e2a357ffd38d7ae7bc3f887ff55f2d721a
Contributed by Steve Loughran.
The S3Guard absence warning of HADOOP-16484 has been changed
so that by default the S3A connector only logs at debug
when the connection to the S3 Store does not have S3Guard
enabled.
The option to control this log level is now
fs.s3a.s3guard.disabled.warn.level
and can be one of: silent, inform, warn, fail.
On a failure, an ExitException is raised with exit code 49.
For details on this safety feature, consult the s3guard documentation.
HADOOP-16986. S3A to not need wildfly JAR on its classpath.
Contributed by Steve Loughran
This is a successor to HADOOP-16346, which enabled the S3A connector
to load the native openssl SSL libraries for better HTTPS performance.
That patch required wildfly.jar to be on the classpath. This
update:
* Makes wildfly.jar optional except in the special case that
"fs.s3a.ssl.channel.mode" is set to "openssl"
* Retains the declaration of wildfly.jar as a compile-time
dependency in the hadoop-aws POM. This means that unless
explicitly excluded, applications importing that published
maven artifact will, transitively, add the specified
wildfly JAR into their classpath for compilation/testing/
distribution.
This is done for packaging and to offer that optional
speedup. It is not mandatory: applications importing
the hadoop-aws POM can exclude it if they choose.
Contributed by Mukund Thakur.
If you set the log org.apache.hadoop.fs.s3a.impl.NetworkBinding
to DEBUG, then when the S3A bucket probe is made -the DNS address
of the S3 endpoint is calculated and printed.
This is useful to see if a large set of processes are all using
the same IP address from the pool of load balancers to which AWS
directs clients when an AWS S3 endpoint is resolved.
This can have implications for performance: if all clients
access the same load balancer performance may be suboptimal.
Note: if bucket probes are disabled, fs.s3a.bucket.probe = 0,
the DNS logging does not take place.
Change-Id: I21b3ac429dc0b543f03e357fdeb94c2d2a328dd8
add unit test, new ITest and then fix the issue: different schema, bucket == skip
factored out the underlying logic for unit testing; also moved
maybeAddTrailingSlash to S3AUtils (while retaining/forwarnding existing method
in S3AFS).
tested: london, sole failure is
testListingDelete[auth=true](org.apache.hadoop.fs.s3a.ITestS3GuardOutOfBandOperations)
filed HADOOP-16853
Change-Id: I4b8d0024469551eda0ec70b4968cba4abed405ed
Contributed by Ben Roling.
ETag values are unpredictable with some S3 encryption algorithms.
Skip ITestS3AMiscOperations tests which make assertions about etags
when default encryption on a bucket is enabled.
When testing with an AWS an account which lacks the privilege
for a call to getBucketEncryption(), we don't skip the tests.
In the event of failure, developers get to expand the
permissions of the account or relax default encryption settings.
Contributed by Steve Loughran
* move qualify logic to S3AFileSystem.makeQualified()
* make S3AFileSystem.qualify() a private redirect to that
* ITestS3GuardFsShell turned off
Contributed by Steve Loughran.
Not all stores do complete validation here; in particular the S3A
Connector does not: checking up the entire directory tree to see if a path matches
is a file significantly slows things down.
This check does take place in S3A mkdirs(), which walks backwards up the list of
parent paths until it finds a directory (success) or a file (failure).
In practice production applications invariably create destination directories
before writing 1+ file into them -restricting check purely to the mkdirs()
call deliver significant speed up while implicitly including the checks.
Change-Id: I2c9df748e92b5655232e7d888d896f1868806eb0
AreContributed by Mukund Thakur.
This addresses an issue which surfaced with KMS encryption: the wrong
KMS key could be picked up in the S3 COPY operation, so
renamed files, while encrypted, would end up with the
bucket default key.
As well as adding tests in the new suite
ITestS3AEncryptionWithDefaultS3Settings,
AbstractSTestS3AHugeFiles has a new test method to
verify that the encryption settings also work
for large files copied via multipart operations.
Contributed by Sergei Poganshev.
Catches Exception instead of IOException in closeStream()
and so handle exceptions such as SdkClientException by
aborting the wrapped stream. This will increase resilience
to failures, as any which occuring during stream closure
will be caught. Furthermore, because the
underlying HTTP connection is aborted, rather than closed,
it will not be recycled to cause problems on subsequent
operations.
This adds a new option fs.s3a.bucket.probe, range (0-2) to
control which probe for a bucket existence to perform on startup.
0: no checks
1: v1 check (as has been performend until now)
2: v2 bucket check, which also incudes a permission check. Default.
When set to 0, bucket existence checks won't be done
during initialization thus making it faster.
When the bucket is not available in S3,
or if fs.s3a.endpoint points to the wrong instance of a private S3 store
consecutive calls like listing, read, write etc. will fail with
an UnknownStoreException.
Contributed by:
* Mukund Thakur (main patch and tests)
* Rajesh Balamohan (v0 list and performance tests)
* lqjacklee (HADOOP-15990/v2 list)
* Steve Loughran (UnknownStoreException support)
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/Constants.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/S3AFileSystem.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/S3ARetryPolicy.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/S3AUtils.java
new file: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/UnknownStoreException.java
new file: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/impl/ErrorTranslation.java
modified: hadoop-tools/hadoop-aws/src/site/markdown/tools/hadoop-aws/index.md
modified: hadoop-tools/hadoop-aws/src/site/markdown/tools/hadoop-aws/performance.md
modified: hadoop-tools/hadoop-aws/src/site/markdown/tools/hadoop-aws/troubleshooting_s3a.md
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/AbstractS3AMockTest.java
new file: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/ITestS3ABucketExistence.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/MockS3ClientFactory.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/TestS3AExceptionTranslation.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/AbstractS3GuardToolTestBase.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestS3GuardToolDynamoDB.java
modified: hadoop-tools/hadoop-aws/src/test/resources/core-site.xml
Change-Id: Ic174f803e655af172d81c1274ed92b51bdceb384
Contributed by Steve Loughran.
During S3A rename() and delete() calls, the list of objects delete is
built up into batches of a thousand and then POSTed in a single large
DeleteObjects request.
But as the IO capacity allowed on an S3 partition may only be 3500 writes
per second *and* each entry in that POST counts as a single write, then
one of those posts alone can trigger throttling on an already loaded
S3 directory tree. Which can trigger backoff and retry, with the same
thousand entry post, and so recreate the exact same problem.
Fixes
* Page size for delete object requests is set in
fs.s3a.bulk.delete.page.size; the default is 250.
* The property fs.s3a.experimental.aws.s3.throttling (default=true)
can be set to false to disable throttle retry logic in the AWS
client SDK -it is all handled in the S3A client. This
gives more visibility in to when operations are being throttled
* Bulk delete throttling events are logged to the log
org.apache.hadoop.fs.s3a.throttled log at INFO; if this appears
often then choose a smaller page size.
* The metric "store_io_throttled" adds the entire count of delete
requests when a single DeleteObjects request is throttled.
* A new quantile, "store_io_throttle_rate" can track throttling
load over time.
* DynamoDB metastore throttle resilience issues have also been
identified and fixed. Note: the fs.s3a.experimental.aws.s3.throttling
flag does not apply to DDB IO precisely because there may still be
lurking issues there and it safest to rely on the DynamoDB client
SDK.
Change-Id: I00f85cdd94fc008864d060533f6bd4870263fd84
Contributed by Steve Loughran.
This fixes two problems with S3Guard authoritative mode and
the auth directory flags which are stored in DynamoDB.
1. mkdirs was creating dir markers without the auth bit,
forcing needless scans on newly created directories and
files subsequently added; it was only with the first listStatus call
on that directory that the dir would be marked as authoritative -even
though it would be complete already.
2. listStatus(path) would reset the authoritative status bit of all
child directories even if they were already marked as authoritative.
Issue #2 is possibly the most expensive, as any treewalk using listStatus
(e.g globfiles) would clear the auth bit for all child directories before
listing them. And this would happen every single time...
essentially you weren't getting authoritative directory listings.
For the curious, that the major bug was actually found during testing
-we'd all missed it during reviews.
A lesson there: the better the tests the fewer the bugs.
Maybe also: something obvious and significant can get by code reviews.
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/S3AFileSystem.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/BulkOperationState.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/DynamoDBMetadataStore.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/LocalMetadataStore.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/MetadataStore.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/NullMetadataStore.java
modified: hadoop-tools/hadoop-aws/src/main/java/org/apache/hadoop/fs/s3a/s3guard/S3Guard.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/ITestS3GuardWriteBack.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/auth/ITestRestrictedReadAccess.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/impl/TestPartialDeleteFailures.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestDynamoDBMetadataStore.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestDynamoDBMetadataStoreAuthoritativeMode.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestDynamoDBMetadataStoreScale.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/ITestS3GuardFsck.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/MetadataStoreTestBase.java
modified: hadoop-tools/hadoop-aws/src/test/java/org/apache/hadoop/fs/s3a/s3guard/TestS3Guard.java
Change-Id: Ic3ffda13f2af2430afedd50fd657b595c83e90a7
Contributed by Mustafa Iman.
This adds a new configuration option fs.s3a.connection.request.timeout
to declare the time out on HTTP requests to the AWS service;
0 means no timeout.
Measured in seconds; the usual time suffixes are all supported
Important: this is the maximum duration of any AWS service call,
including upload and copy operations. If non-zero, it must be larger
than the time to upload multi-megabyte blocks to S3 from the client,
and to rename many-GB files. Use with care.
Change-Id: I407745341068b702bf8f401fb96450a9f987c51c
* Enhanced builder + FS spec
* s3a FS to use this to skip HEAD on open
* and to use version/etag when opening the file
works with S3AFileStatus FS and S3ALocatedFileStatus
Introduces `openssl` as an option for `fs.s3a.ssl.channel.mode`.
The new option is documented and marked as experimental.
For details on how to use this, consult the peformance document
in the s3a documentation.
This patch is the successor to HADOOP-16050 "S3A SSL connections
should use OpenSSL" -which was reverted because of
incompatibilities between the wildfly OpenSSL client and the AWS
HTTPS servers (HADOOP-16347). With the Wildfly release moved up
to 1.0.7.Final (HADOOP-16405) everything should now work.
Related issues:
* HADOOP-15669. ABFS: Improve HTTPS Performance
* HADOOP-16050: S3A SSL connections should use OpenSSL
* HADOOP-16371: Option to disable GCM for SSL connections when running on Java 8
* HADOOP-16405: Upgrade Wildfly Openssl version to 1.0.7.Final
Contributed by Sahil Takiar
Change-Id: I80a4bc5051519f186b7383b2c1cea140be42444e
Contains:
HADOOP-16474. S3Guard ProgressiveRenameTracker to mark destination
dirirectory as authoritative on success.
HADOOP-16684. S3guard bucket info to list a bit more about
authoritative paths.
HADOOP-16722. S3GuardTool to support FilterFileSystem.
This patch improves the marking of newly created/import directory
trees in S3Guard DynamoDB tables as authoritative.
Specific changes:
* Renamed directories are marked as authoritative if the entire
operation succeeded (HADOOP-16474).
* When updating parent table entries as part of any table write,
there's no overwriting of their authoritative flag.
s3guard import changes:
* new -verbose flag to print out what is going on.
* The "s3guard import" command lets you declare that a directory tree
is to be marked as authoritative
hadoop s3guard import -authoritative -verbose s3a://bucket/path
When importing a listing and a file is found, the import tool queries
the metastore and only updates the entry if the file is different from
before, where different == new timestamp, etag, or length. S3Guard can get
timestamp differences due to clock skew in PUT operations.
As the recursive list performed by the import command doesn't retrieve the
versionID, the existing entry may in fact be more complete.
When updating an existing due to clock skew the existing version ID
is propagated to the new entry (note: the etags must match; this is needed
to deal with inconsistent listings).
There is a new s3guard command to audit a s3guard bucket/path's
authoritative state:
hadoop s3guard authoritative -check-config s3a://bucket/path
This is primarily for testing/auditing.
The s3guard bucket-info command also provides some more details on the
authoritative state of a store (HADOOP-16684).
Change-Id: I58001341c04f6f3597fcb4fcb1581ccefeb77d91
Contributed by Steve Loughran.
This is part of the ongoing refactoring of the S3A codebase, with the
delegation token support (HADOOP-14556) no longer given a direct reference
to the owning S3AFileSystem. Instead it gets a StoreContext and a new
interface, DelegationOperations, to access those operations offered by S3AFS
which are specifically needed by the DT bindings.
The sole operation needed is listAWSPolicyRules(), which is used to allow
S3A FS and the S3Guard metastore to return the AWS policy rules needed to
access their specific services/buckets/tables, allowing the AssumedRole
delegation token to be locked down.
As further restructuring takes place, that interface's implementation
can be moved to wherever the new home for those operations ends up.
Although it changes the API of an extension point, that feature (S3
Delegation Tokens) has not shipped; backwards compatibility is not a
problem except for anyone who has implemented DT support against trunk.
To those developers: sorry.
Change-Id: I770f58b49ff7634a34875ba37b7d51c94d7c21da
Contributed by Steve Loughran.
This downgrade the checks for leftover __magic entries from fail to warn now the parallel
test runs make speculation more likely.
Change-Id: Ia4df2e90f82a06dbae69f3fdaadcbb0e0d713b38
Contributed by Steve Loughran.
This FileSystem instantiation so if an IOException or RuntimeException is
raised in the invocation of FileSystem.initialize() then a best-effort
attempt is made to close the FS instance; exceptions raised that there
are swallowed.
The S3AFileSystem is also modified to do its own cleanup if an
IOException is raised during its initialize() process, it being the
FS we know has the "potential" to leak threads, especially in
extension points (e.g AWS Authenticators) which spawn threads.
Change-Id: Ib84073a606c9d53bf53cbfca4629876a03894f04
Contributed by Steve Loughran.
Includes HADOOP-16651. S3 getBucketLocation() can return "US" for us-east.
Change-Id: Ifc0dca76e51495ed1a8fc0f077b86bf125deff40
Contributed by Steve Loughran.
This addresses two scale issues which has surfaced in large scale benchmarks
of the S3A Committers.
* Thread pools are not cleaned up.
This now happens, with tests.
* OOM on job commit for jobs with many thousands of tasks,
each generating tens of (very large) files.
Instead of loading all pending commits into memory as a single list, the list
of files to load is the sole list which is passed around; .pendingset files are
loaded and processed in isolation -and reloaded if necessary for any
abort/rollback operation.
The parallel commit/abort/revert operations now work at the .pendingset level,
rather than that of individual pending commit files. The existing parallelized
Tasks API is still used to commit those files, but with a null thread pool, so
as to serialize the operations.
Change-Id: I5c8240cd31800eaa83d112358770ca0eb2bca797
Contributed by Steve Loughran.
Replaces the committer-specific terasort and MR test jobs with parameterization
of the (now single tests) and use of file:// over hdfs:// as the cluster FS.
The parameterization ensures that only one of the specific committer tests
run at a time -overloads of the test machines are less likely, and so the
suites can be pulled back into the parallel phase.
There's also more detailed validation of the stage outputs of the terasorting;
if one test fails the rest are all skipped. This and the fact that job
output is stored under target/yarn-${timestamp} means failures should
be more debuggable.
Change-Id: Iefa370ba73c6419496e6e69dd6673d00f37ff095
Contributed by Steve Loughran.
Includes
-S3A glob scans don't bother trying to resolve symlinks
-stack traces don't get lost in getFileStatuses() when exceptions are wrapped
-debug level logging of what is up in Globber
-Contains HADOOP-13373. Add S3A implementation of FSMainOperationsBaseTest.
-ITestRestrictedReadAccess tests incomplete read access to files.
This adds a builder API for constructing globbers which other stores can use
so that they too can skip symlink resolution when not needed.
Change-Id: I23bcdb2783d6bd77cf168fdc165b1b4b334d91c7
Contributed by Steve Loughran.
This complements the StreamCapabilities Interface by allowing applications to probe for a specific path on a specific instance of a FileSystem client
to offer a specific capability.
This is intended to allow applications to determine
* Whether a method is implemented before calling it and dealing with UnsupportedOperationException.
* Whether a specific feature is believed to be available in the remote store.
As well as a common set of capabilities defined in CommonPathCapabilities,
file systems are free to add their own capabilities, prefixed with
fs. + schema + .
The plan is to identify and document more capabilities -and for file systems which add new features, for a declaration of the availability of the feature to always be available.
Note
* The remote store is not expected to be checked for the feature;
It is more a check of client API and the client's configuration/knowledge
of the state of the remote system.
* Permissions are not checked.
Change-Id: I80bfebe94f4a8bdad8f3ac055495735b824968f5
Contributed by Sahil Takiar.
This moves the SSLSocketFactoryEx class from hadoop-azure into hadoop-common
as the DelegatingSSLSocketFactory and binds the S3A connector to it so that
it can avoid using those HTTPS algorithms which are underperformant on Java 8.
Change-Id: Ie9e6ac24deac1aa05e136e08899620efa7d22abd
Contributed by Steve Loughran.
This patch avoids issuing any HEAD path request when creating a file with overwrite=true,
so 404s will not end up in the S3 load balancers unless someone calls getFileStatus/exists/isFile
in their own code.
The Hadoop FsShell CommandWithDestination class is modified to not register uncreated files
for deleteOnExit(), because that calls exists() and so can place the 404 in the cache, even
after S3A is patched to not do it itself.
Because S3Guard knows when a file should be present, it adds a special FileNotFound retry policy
independently configurable from other retry policies; it is also exponential, but with
different parameters. This is because every HEAD request will refresh any 404 cached in
the S3 Load Balancers. It's not enough to retry: we have to have a suitable gap between
attempts to (hopefully) ensure any cached entry wil be gone.
The options and values are:
fs.s3a.s3guard.consistency.retry.interval: 2s
fs.s3a.s3guard.consistency.retry.limit: 7
The S3A copy() method used during rename() raises a RemoteFileChangedException which is not caught
so not downgraded to false. Thus: when a rename is unrecoverable, this fact is propagated.
Copy operations without S3Guard lack the confidence that the file exists, so don't retry the same way:
it will fail fast with a different error message. However, because create(path, overwrite=false) no
longer does HEAD path, we can at least be confident that S3A itself is not creating those cached
404 markers.
Change-Id: Ia7807faad8b9a8546836cb19f816cccf17cca26d
Contributed by Steve Loughran.
This overlaps the scanning for directory entries with batched calls to S3 DELETE and updates of the S3Guard tables.
It also uses S3Guard to list the files to delete, so find newly created files even when S3 listings are not use consistent.
For path which the client considers S3Guard to be authoritative, we also do a recursive LIST of the store and delete files; this is to find unindexed files and do guarantee that the delete(path, true) call really does delete everything underneath.
Change-Id: Ice2f6e940c506e0b3a78fa534a99721b1698708e
Contributed by Gabor Bota.
This pulls the tracking of the lastUpdated timestamp of metadata entries up from the DDB metastore into all s3guard stores, and then uses this to filter out expired tombstones from listings.
Change-Id: I80f121236b49c75a024116f65a3ef29d3580b462
Contributed by Steve Loughran and Gabor Bota.
This
* Asks S3Guard to determine the empty directory status.
* Has S3A's root directory rm("/") command to always return false (as abfs does)
* Documents that object stores MAY do this
* Overloads ContractTestUtils.assertDeleted to let assertions declare that the source directory does not need to exist. This stops inconsistencies in directory listings failing a root test.
It avoids a recent regression (HADOOP-16279) where if there was a tombstone above the first element found in a directory listing, the directory would be considered empty, when in fact there were child entries. That could downgrade an rm(path, recursive) to a no-op, while also confusing rename(src, dest), as dest could be mistaken for an empty directory and so permit the copy above it, rather than reject it "destination path exists and is not empty".
Change-Id: I136a3d1a5a48a67e6155d790a40ff558d0d2c108
Contributed by Steve Loughran
Contains
- HADOOP-16397. Hadoop S3Guard Prune command to support a -tombstone option.
- HADOOP-16406. ITestDynamoDBMetadataStore.testProvisionTable times out intermittently
This patch doesn't fix the underlying problem but it
* changes some tests to clean up better
* does a lot more in logging operations in against DDB, if enabled
* adds an entry point to dump the state of the metastore and s3 tables (precursor to fsck)
* adds a purge entry point to help clean up after a test run has got a store into a mess
* s3guard prune command adds -tombstone option to only clear tombstones
The outcome is that tests should pass consistently and if problems occur we have better diagnostics.
Change-Id: I3eca3f5529d7f6fec398c0ff0472919f08f054eb
Contributed by Steve Loughran.
This patch
* changes the default for the staging committer to append, as we get for the classic FileOutputFormat committer
* adds a check for the dest path being a file not a dir
* adds tests for this
* Changes AbstractCommitTerasortIT. to not use the simple parser, so fails if the file is present.
Change-Id: Id53742958ed1cf321ff96c9063505d64f3254f53
Contributed by Ben Roling.
S3Guard will now track the etag of uploaded files and, if an S3
bucket is versioned, the object version.
You can then control how to react to a mismatch between the data
in the DynamoDB table and that in the store: warn, fail, or, when
using versions, return the original value.
This adds two new columns to the table: etag and version.
This is transparent to older S3A clients -but when such clients
add/update data to the S3Guard table, they will not add these values.
As a result, the etag/version checks will not work with files uploaded by older clients.
For a consistent experience, upgrade all clients to use the latest hadoop version.
This is the first step for on-demand operations: things recognize when they are using on-demand tables,
as do the tests.
Contributed by Steve Loughran.
This is needed to fix up some confusion about caching of job.addCache() handling of S3A paths; all parent dirs -the files are downloaded by the NM without using the DTs of the user submitting the job. This means that when you submit jobs to an EC2 cluster with lower IAM permissions than the user, cached resources don't get downloaded and the job doesn't start.
Production code changes:
* S3AFileStatus Adds "true" to the superclass's encrypted flag during construction.
Tests
* Base AbstractContractOpenTest can control whether zero byte files created in tests are encrypted. Not done via an XML attribute, just a subclass point. Thoughts?
* Verify that the filecache considers paths to not have the permissions which trigger reduce-privilege downloads
* And extend ITestDelegatedMRJob to test a completely different bucket (open street map), to verify that cached resources do get their tokens picked up
Docs:
* Advise FS developers to say all files are encrypted. It's otherwise harmless and it'll stop other people seeing impossible to debug error messages on app launch.
Contributed by Steve Loughran.
Change-Id: Ifaae4c9d735ccc5eafeebd2584b65daf2d4e5da3
Contributed by Steve Loughran.
This includes
- HADOOP-15890. Some S3A committer tests don't match ITest* pattern; don't run in maven
- MAPREDUCE-7090. BigMapOutput example doesn't work with paths off cluster fs
- MAPREDUCE-7091. Terasort on S3A to switch to new committers
- MAPREDUCE-7092. MR examples to work better against cloud stores
S3A to implement S3 Select through this API.
The new openFile() API is asynchronous, and implemented across FileSystem and FileContext.
The MapReduce V2 inputs are moved to this API, and you can actually set must/may
options to pass in.
This is more useful for setting things like s3a seek policy than for S3 select,
as the existing input format/record readers can't handle S3 select output where
the stream is shorter than the file length, and splitting plain text is suboptimal.
Future work is needed there.
In the meantime, any/all filesystem connectors are now free to add their own filesystem-specific
configuration parameters which can be set in jobs and used to set filesystem input stream
options (seek policy, retry, encryption secrets, etc).
Contributed by Steve Loughran
